Solar-Log Sensor Box Installation Seite 8

Installation Manual Sensor Box
The connection cable can be extended (max 100 m). Please
be sure that the supply voltage (12 V
the connection cable. For longer distance please use a cable
with bigger wire cross section.
For outdoor use, the connection must be protected in conform-
ity with IP54. For indoor wiring, please use a shielded data
cable. The shield of the cable must be connected with a poten-
tial equalisation. The 4 wires of the connection cable have to
be connected with the Solar-Log
Connection plug Solar-Log
1 (Data+)
2 (+12 V)
3 (GND)
4 (Data-)
DC
TM
connection plug.
TM
Sensor Box
Data+ A (brown)
+12 V (red)
GND (black)
Data B (orange)
TM
Solar-Log Sensor Box Installation | 8 von 28
) reaches the end of