Herunterladen Inhalt Inhalt Diese Seite drucken

Tips And Notes; Use; Cleaning And Storage - Cleanmaxx SV1801A Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Tips and Notes

Always clean mattresses on both sides.
We recommend cleaning new mattresses once a month. Older mattresses
should initially be cleaned every day for a week. We then recommend
cleaning them once a month.
The fi lter should be replaced every 12 – 18 months; the UV-C lamp (11)
should be replaced every 12 – 24 months. If you have any questions about
spare parts, please contact the customer service department via our web-
site: www.dspro.de/kundenservice

Use

PLEASE NOTE!
The device should only be used if it has been completely and correctly assembled!
The dust container and the fi lter must be inserted and must not be damaged. If
the dirt were to get inside the motor unit, this could damage the motor.
Make sure that the safety switches of the UV-C lamp are not blocked!
1. Insert the mains plug into a properly installed plug socket that is easily accessible.
2. Place the device down fl at on the surface which is to be cleaned.
3. Press the On / Off switch (1) to switch on the device. The device starts to vacuum and
the UV-C lamp (11) and the vibration head (10) switches on.
The vibration shakes up the surface which is to be cleaned and the dust which
is agitated is sucked in through the suction opening (7).
4. Guide the device very slowly and evenly over the surface to be cleaned.
5. After vacuuming, press the On / Off switch to switch off the device.
6. Remove the mains plug from the plug socket.

Cleaning and Storage

PLEASE NOTE!
Empty the dust container each time after you use the device. The fi lter must also be
regularly cleaned in order to prevent overloading of the motor.
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice. These can damage the surface.
Make sure that the mains plug has been pulled out and the device is disconnected
from the power.
As required, wipe down the motor unit with a damp soft cloth. Then dry it with a soft
cloth.
Wipe out the recess for the dust container (4) with a duster.
Store the device in a dry, cool place that is not accessible to children and animals.
17
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis