Technical Data; Disposal - Cleanmaxx SV1801A Gebrauchsanleitung

Problem Possible cause / solution / tips
•
The UV-C
lamp (11) does
•
not light up.
•
During vacuum
cleaning, an un-
pleasant smell
•
is detected.

Technical Data

Model number:
Article number:
Voltage supply:
Power:
Protection class:
ID operating instructions: Z 03406 M DS V1 0419

Disposal

PLEASE NOTE!
■ The UV-C lamp should be removed prior to disposal of the device and disposed of
separately from the device. Notes on how to remove the UV-C lamp can be found in
the "Cleaning and Storage" chapter – "Cleaning the UV-C Lamp".
Dispose of the packaging material in an environmentally friendly manner so that
it can be recycled.
This device is governed by the European Directive 2012/19/EU on waste electri-
cal and electronic equipment (WEEE). Do not dispose of this device as normal
domestic waste, but rather in an environmentally friendly manner via an offi cially
approved waste disposal company.
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1, 19258 Gallin, Deutschland
Tel.: +49 38851 314650
All rights reserved.
19
The automatic switch-off function of the UV-C lamp has been
activated. Check the safety switches (see the "Safety Devices"
chapter).
The automatic switch-off function has not been activated. The
UV-C lamp or the device is defective. Contact our customer
service department.
Is the device being used for the fi rst time? A smell often
develops when new devices are fi rst used. The smell should
disappear once the device has been used several times.
Has the device already been used frequently? The device is
defective. Switch off the device, pull the mains plug out of the
plug socket and contact the customer service department.
SV1801A
03406
220 – 240 V ~ 50 / 60 Hz
300 W
II
(Calls to German landlines are subject to your provider's charges.)
EN