Wires Section Table; Outdoor Panel Internal Wiring - Fermax KIT VISIÓN DIGITAL Installationsanleitung

WIRES SECTION TABLE

The section of the wires used in the installation affects the functionality of
your kit. It is very important to follow the minimum sections shown in the table
below. For small installations (less than 100 mts) FERMAX recommends its ca-
ble REF. 5919.
In case you plan to install additional terminals in the future, it is advisable to
use a section larger than the one shown in this table.

OUTDOOR PANEL INTERNAL WIRING

The outdoor panels are supplied
internally wired, as shown below. The
system cannot work if these internal
connections are removed or altered.
Therefore, if you connect any wire to a ter-
minal already wired (from manufacture)
make sure that none are removed.
FERMAX ELECTRÓNICA S.A.E. is continuously improving its products. Therefore,
we keep the right to modify the product without notification.
DIGITAL OUTDOOR PANEL 1/L
Pag 33