How To Add An Outdoor Panel; Accesories - Fermax KIT VISIÓN DIGITAL Installationsanleitung

How to add an Aditional Outdoor Panel
It is possible to extend the VISION DIGITAL KIT by installing an Aditional
Audio Outdoor Panel at another access to the building (service gate, garage,
etc...).
ADS AMPLIFIER
KIT
CAMERA
MAIN
NOTE:
Terminals can only be programmed from the main panel (JP1 connected).

ACCESORIES

The following are some examples of FERMAX accesories that can be used
with the KIT, and some examples of typical installations with these devices.
* SURFACE BOX (REF.8951): To install the Outdoor Panel in places where
there is no possibility of flushing in the wall (marble, thin walls, etc.)
* CONVERSION FRAMES (REF.8991) Used for covering the gap in the wall
from previous installations.
* ELECTRONIC EXTENSION CALL (REF.2040) See next page.
* STAIRS LIGHT RELAY (REF.2013) Details show below.
Pag 30
TO THE MONITOR
POWER
SUPPLY UNIT
Connect
JP2
PANEL
Wiring for ADDITIONAL AUDIO PANEL KITS
ADS AMPLIFIER
KIT
SECONDARY PANEL
DO NOT
JP2
connect