ACD GRUPPE M210SE Bedienungsanleitung Seite 19

Never position the mobile terminal, docking station or power
supply unit in close proximity to heat sources (heating fans or
similar equipment) and never expose it to direct sunlight,
excessive dust sources or shocks. Ensure that the connection
cables or power supply units do not pose a risk of tripping.
The maximum allowed ambient temperatures for the M210SE are
ATTENTION
listed below.
Operating temperature:
Storage temperature:
battery)
Only operate the touchscreen using the fingertips or with the
intended touch-pen. Never use a pen or other sharp objects.
ATTENTION
The touch-pen may only be used to operate the touchscreen. It
may not be used for anything else. Please be aware that the touch-
pen presents a potential injury risk.
ATTENTION
Please consult a doctor or the manufacturer of the medical devices
before using the mobile terminal and the associated components
in the vicinity of medical devices (e.g. pacemakers).
ATTENTION
Do not use the mobile terminal in explosive areas.
ATTENTION
The mobile terminal, the docking station, the power supply units
as well as any connection cables must be examined for damage
prior to use. Damaged parts must be replaced. In order to do so,
please contact ACD Elektronik GmbH.
ATTENTION
Unintended use of the interfaces is not permitted.
ATTENTION
In order to prevent overheating, do not cover the mobile terminal,
docking station or the power supply unit when in use.
ATTENTION
The device may only be opened by a qualified expert.
ATTENTION
M210SE_Set_Kurzübersicht_Brief_Overview_V1.08_de_en
0 °C to 45 °C/32 °F to 113 °F
-20 °C to 70 °C/-4 °F to 158 °F (without
19 / 31