Configuration Of Compex Sgx3226 Through Web Management Interface - Compex SGX3226 Schnellinstallationsanleitung

Note:
Please refer to the User's Manual in the CD provided for more information on configuring
Compex SGX3226.

10. Configuration of Compex SGX3226 through Web Management Interface

Before any configuration is done for Compex SGX3226, ensure that the TCP/IP settings of your
PC are configured. The subnet of your PC's IP Address must be the same as your switch, such
as, if the default IP Address of Compex SGX3226 is 192.168.100.128 and the subnet mask is
255.255.255.0, then set your PC's IP address to 192.168.100.xxx and subnet mask to
255.255.255.0.
Now, you can configure Compex SGX3226 through Web Management Interface easily. To do
so, you need to launch your web browser software, either Internet Explorer or Netscape, and type
in URL: http://192.168.100.128.
From there, you can easily view the GUI shown below:
16 Compex 24 Port 10/100 Mbps plus 2 Port Gigabit English
Copper SNMP Managed Switch
SGX3226