Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Buffer Memory
•
•
Back Plane Capacity
•
Physical Dimension
6. Hardware Installation
Compex SGX3226 is suitable for office environment usage, which can be either installed on a
flat surface (desktop) or mounted on a 19-inch rack. The following steps illustrate how a proper
installation has to be done:
6.1.
Desktop Installation
1.
Unpack the switch.
2.
Remove the backing strip from the 4 rubber feet and attach to the underside of the
switch chassis firmly.
3.
Place Compex SGX3226 with a power outlet located nearby. Be sure to set the
device with sufficient space for heat ventilation.
4.
The surface to place Compex SGX3226 should be clean, smooth, level and sturdy.
Ensure there is enough space around the unit to allow attachment of network cables
for air circulation.
5.
Connect the power cord to the power socket on the rear panel of the Compex
SGX3226.
6.2.
Rack-Mounted Installation
1.
Position one bracket to align with the holes on one side of Compex SGX3226 and
secure it with the smaller bracket screws (3mm). Then attach the other bracket to
another side of it.
English
6MB
12 Gbps
440 mm x 330 mm x 66 mm (L x D x H)
Compex 24 Port 10/100 Mbps plus 2 Port Gigabit
Copper SNMP Managed Switch
SGX3226
9
Werbung
Inhaltsverzeichnis
