System Settings; Equaliser; Network; Backlight - Telefunken Ri1001 Bedienungsanleitung

5.

SYSTEM SETTINGS

Press the MENU button (6) / (26) to display the menu, rotate the ◄ SCROLL ► (7) or press
„
the ▲/▼/◄/► (27) / (38) / (28) / (37) to select Main menu and then press the SELECT
button (7) / (36) to confirm.
Rotate the ◄ SCROLL ► (7) at the appliance or press the ▲/▼/◄/► (27) / (38) / (28) /
„
(37) on the remote control to select one of the following menu options and then press the
SELECT button (7) / (36) again to confirm.
SYSTEM SETTINGS

Equaliser

Network

Time/Date
Inactive Standby
Language
Factory Reset
Software update
Software upgrade
Setup wizard
INFO

Backlight

5.1 Equaliser
This system supports a variety of equalizers and sound effects.
Press the EQ button (42) on the remote control to access the Equaliser menu.
„
Alternatively:
Press the ▲/▼/◄/► (27) / (38) / (28) / (37) during System settings mode to select Equaliser
„
and then press the SELECT button (7) / (36) to confirm.
The display (2) will show: Flat > Classic > Rock > Pop > Jazz
„
Press the ▲/▼ ▲/▼/◄/► (27) / (38) / (28) / (37) buttons to select and then press the SELECT
„
button (7) / (36) to confirm.
5.2 Network
Press the ▲/▼/◄/► (27) / (38) / (28) / (37) during System settings mode to select Network
„
and press the SELECT button (7) / (36) to confirm.
Press the ▲/▼/◄/► (27) / (38) / (28) / (37) to select from the following menu options, and
„
then press the SELECT button (7) / (36) to confirm:
Menu option
Network wizard
PBC WLAN setup
Different sound effects: Flat, Classic, Rock, Pop, Jazz
Network wizard, PBC WLAN setup, View settings, etc.
Set time/date, Auto update, Set format, Set timezone, Daylight
savings
Turn off the appliance after a certain time in play mode
Sets the language of the OSD: English, German, Danish, Dutch,
Finnish, etc.
Resets the appliance back to the Factory settings
Options for updating the firmware
Upgrades the firmware via PC (ONLY for qualified employees)
Wizard for setting the system parameters
Shows the Software version and Radio ID
Offer the options Timeout and On level
SSID - select the desire wireless network.
Rescan - Scan for available networks.
Wired - select wired network.
Manual config - select wired/wireless network with DHCP enable / disable.
Selects PCB at the appliance. Press the WPS button on the router or
modem device that you wish to connect with. Press the SELECT button
(7) / (36) button to continue.
28