Cleaning - Vornado 133-EU Betriebsanleitung

CLEANING

GRILL REMOVAL (MODEL 133)
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing grill.
1. Remove the 4 screws located
on the back of the inlet grill, at
roughly 2, 5, 7 and 10 o'clock
positions, to release the Front
Grill.
2. Dust or wash Front Grill with a
mild dishwashing soap. Do not
place grill in the dishwasher. The
excessive heat can distort the
plastic.
3. To reattach - position the Front
Grill so the Vornado logo in
the center of the Front Grill is
straight. Replace all the screws.
Use the brush attachment on your
household vacuum cleaner to
vacuum any accumulated dust off
the Front Grill and Air Inlets.
Screwdriver required.
Screw
Screw
Screw
Note: The motor is
permanently lubricated
and requires no oiling.
Screw
11
English