Operation; Switching Off; Temperature Regulation; Fastfreeze Function - REX RFC2820 Benutzerinformation

authority for information on how to
discard the appliance correctly.

OPERATION

Control panel
Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED indicators are off.

Switching off

Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.

Temperature regulation

To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required temperature
lights up. Selection is progressive, varying
from 2°C to 8°C.
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is generally
the most suitable.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
1 2
4 3
• Do not cause damage to the part of the
cooling unit that is near the heat
exchanger.
Temperature indicator LED
1
FastFreeze indicator LED
2
FastFreeze button
3
Temperature regulator
4
ON/OFF button
• room temperature
• frequency of opening the door
• quantity of food stored
• appliance location.
1. Touch temperature regulator.
Current temperature indicator blinks. Any
time you touch the temperature regulator,
the setting moves by one position. The
corresponding LED blinks for a while.
2. Touch the temperature regulator until
the required temperature is selected.

FastFreeze function

You can activate FastFreezefunction by
pressing the FastFreeze button.
The LED corresponding to the symbol
FastFreeze indicator lights up.
You can deactivate FastFreezefunction by
pressing the FastFreeze button again.
The FastFreeze indicator will light off.
This function stops
automatically after 52 hours.
5