Wlan; Microsd Card; Uhf-Rfid - ACD M160 Kurzübersicht

16.3 WLAN

WLAN in accordance with IEEE 802.11a/b/g/n can be optionally integrated in the mobile terminal.
WLAN Security (standard encodings are ACD-validated)
WEP, WPA, IEEE802.11i, WPA2, WPA2-PSK, 802.1x: authentication

16.4 MicroSD card

A microSD card is available as an optional accessory for the mobile terminal. The device is equipped with a
microSD card slot which can be used to expand the memory of the mobile terminal. The microSD card can
be accessed from the battery compartment.
The microSD card may only be inserted by a trained expert.
The microSD card must be inserted into the microSD card slot with the contacts facing downwards. The
microSD card has been correctly inserted when the card clicks into position. Insert the battery back into the
device and restart the mobile terminal. The microSD card is now visible in Windows Explorer under the name
SDMMCCard2.
Fig. 10: Inserting the microSD card into the microSD card slot

16.5 UHF-RFID

UHF-RFID is available as an optional accessory for the mobile terminal. The UHF-RFID reader is located in
the top of the housing above the scanner disc. In order to read a UHF-RFID tag, hold the mobile terminal
centrally and in front of the UHF-RFID tag.
The UHF-RFID reader technical data is described below:
Description
Frequency range EU
Frequency range worldwide
Reading range
Air Interface Protocol
M160_Set_Kurzübersicht_Brief Overview_V1.04_de_en
Value
865 bis 868 MHz
902 bis 928 MHz
Up to 1.0 m
EPCglobal UHF Class 1 Gen 2
ISO 18000-63 (formerly 18000-6C)
Supports dense reader mode (DRM)
26 / 29