Suspend Mode; Keyboard/Buttons - ACD M160 Kurzübersicht

15.1.3 Suspend mode

In suspend mode, the operating system and the application running on it are paused. The display is switched
off and becomes dark. The mobile terminal consumes very little power in suspend mode.
Please use the following buttons in order to activate suspend mode:
Rapid-entry keyboard: „C" + „orange Enter" button (held for 10 seconds).
Silicone keyboard:
The status LED is flashing green as soon as the mobile terminal is in suspend mode.
Please use the following buttons in order to leave suspend mode:
Rapid-entry keyboard: „C" + „orange Enter" button (held for 1 seconds).
Silicone keyboard:
When leaving suspend mode, the application and the operating system are re-launched from the same point
at which they were paused.

15.1.4 Keyboard/buttons

Rapid-entry
keyboard with
Type
alphanumeric
function,
Number of
15 buttons,
buttons
5 function keys
Button
15 mm
distances
0 to 9, Enter, , ,
Layout
S, C, F1 – F10
Scanner
S
buttons
Switching to
2nd keyboard
C + any button
level
Allocation of Customer-specific
button data (cf. software
combinations documentation)
Selection of
button C + any button
combinations
Miscellaneous
not available
M160_Set_Kurzübersicht_Brief Overview_V1.04_de_en
Power button (held for 10 seconds).
Power button (held for 1 seconds).
Hard shell
Illuminated
silicone keyboard
keyboard
Illuminated silicone
keyboard with
alphanumeric
function
25 buttons,
5 function keys
not available
0 bis 9, ., Enter,
shift, C, , , ,
, Tab, Key, alpha,
F, Suspend, Light,
Scan, F1 – F5
yellow buttons
C + any button
Customer-specific
data (cf. software
documentation)
C + any button
not available
21 / 29