Mounting Aid; Internal Lift-Off Protector With Integrated Jack-Up; General Information - Sartorius Contego Typ D1 Installationshanbuch

Installation Manual
2.2

Mounting Aid

The auxiliary mounting plates (1) facilitate installation of the weighing module.
2.3

Internal Lift-Off Protector with Integrated Jack-Up

2.3.1

General Information

The Contego® Weighing Module is equipped with an internal lift-off protector, i.e. no additional borings
apart from the mounting holes in the vessel foot are required. Moreover, the vessel can be lifted by turning
the lift-off protector bolt (3) (see Chapter 2.3.2), e.g., when the weigh cell must be replaced.
Sartorius
Hygienic Weighing Module Contego®
Pos. Description
1 Upper plate
2 Bolt (2x)
3 Lift-off protector
4 Locknut
5 Threaded bush
6 Lower plate
Remove the auxiliary
mounting plates
after mounting.
EN-5