Prepare Vessel Foot - Sartorius Contego Typ D1 Installationshanbuch

Hygienic Weighing Module Contego®
4.1.2

Prepare Vessel Foot

Caution!
Create the drilling pattern of the upper plate of the weighing module (see
Chapter 3.2.3) for each vessel foot depending on the location of weighing modules
(see Chapter 2.1).
Note: The diameters of the vessel foot, vessel leg, and lower plate of the weighing module (see
Chapter 3.2.3) must be the same for easy cleaning of the weighing module.
Location example for 3 weighing modules
EN-14
Installation Manual
Sartorius