Servicing/Repairs/Cleaning; Servicing; Replace The Bellow - Sartorius Contego Typ D1 Installationshanbuch

Hygienic Weighing Module Contego®
8

Servicing/Repairs/Cleaning

8.1

Servicing

8.1.1

Replace the Bellow

Warning:
The vessel may turn over during mounting.
Securing the vessel against tipping is imperative.
Procedure
•
Remove a defective bellow (not shown) and discard it according to the local regulations.
•
Release and remove the bolts (7).
•
Fold the stopper (6) onto the bottom plate and withdraw it sideways together with the film.
•
Release and remove the bolts (1).
•
Release the locknut (4) and screw the bolt of the lift-off protector (3) at the hex (2) into the threaded
bush (5).
•
Release and remove the threaded bush (secured with Loctite) with the complete lift-off protector (3).
EN-26
Installation Manual
Sartorius