AEG AIK3022R Benutzerinformation Seite 76

76 www.aeg.com
Hb
Do a final check to make sure that:
• All screws are tightened.
8 mm
Ha
Hb
Hb
Hd
Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and the
furniture door and mark the holes.
Remove the small squares and drill holes
with ø 2 mm at 8 mm from the outer edge
of the door.
Place the small square on the guide again
and fix it with the screws supplied.
Align the kitchen furniture door and the
appliance door by adjusting the part (Hb).
Press the part (Hd) on the part (Hb).
• The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.