Husqvarna ROYAL 43S Bedienungsanleitung Seite 9

Grassbox Assembly
Assembling the Grassbox Screen
• Do not cut or separate the 3 parts of the
grassbox screen.
1. Fold the screen sides inwards.(E1)
2. Align the matching tabs and slots and press
firmly together. Ensure clips are engaged.
The assembled screen should appear as
illustrated.(E2)
Fitting the Grassbox Screen to the Grassbox
Lower
Locate the tabs on the bottom of the grassbox
screen into the slots in the base of the grassbox
lower and push home.(E3)
Fitting the Grassbox Lid
1. Place the upper lid onto the lower
grassbox.(E4)
2. Align the clips with the slots. Push the two
halves together, starting from the rear of the
box and working forward.(E5) Ensure that
all clips are securely connected.
Fitting Fully Assembled Grassbox to
Lawnmower
1. Lift safety flap. Locate lugs of the full
assembled grassbox into the slots in the top
of the deck. Fit location studs on safety flap
into location holes on grassbox lid.(E6)
• Removal is the reverse procedure.
Please Note :- Ensure no gap remains
between the safety flap and the grassbox
Where grass collection is not required
you can use the lawnmower without
the grassbox. Ensure the safety flap is
fully closed
Grass Collection Indicator
• IMPORTANT! The machine must be
running for the grass collection indicator
to operate. Follow instructions in the Use -
starting and stopping section.
1. Your lawnmower has a grass collection
indicator which tells you when the grassbox
needs emptying. When the indicator is
visible, grass is being collected.(E7)
2. When the indicator starts to drop it's time to
empty the grassbox.(E8)
3. Release the OPC Lever and remove the
grassbox for emptying.
Emptying the Grassbox
1. Hold the grassbox as illustrated.(E9)
• Loose grass will automatically clear on
restarting the machine. If the ball indicator
does not rise, then manually clean out the
discharge shoot.
• Ensure the discharge chute is clean and
ASSEMBLY INSTRUCTIONS
E1
E3
E4
E6
E7
E9
E2
E5
E8
free from
debris.
4 - ENGLISH