Electrical Connection - Olimpia splendid CALDO CRYSTAL Installations, Bedienungs And Wartungsanweisungen

e. Place the slots (X) on the rear part of the appliance on the screws pushing the
appliance itself against the wall (figure F - phase 1).
f. Push the appliance 10 mm towards the left (figure F - phase 2) then push it about
8÷10mm downwards (figure F - phase 3).
g. Lastly, check that the appliance is steady and well attached to the wall.
• Before connecting the appliance plug to the power outlet, make
sure that the voltage values indicated on the data plate corre-
spond to the mains supply ones and that the outlet is equipped
with an efficient grounding.
• In case of incompatibility between the outlet and the plug of the
appliance, let the outlet be replaced with another one of the suit-
able type by professionally qualified personnel, which verify that
the outlet cables section is suitable for the power absorbed by
the appliance. Generally, it's not advised to use adapters and/
or extension cords; if their use should become essential, they
must comply with the current safety standards and their current
capacity (A) mustn't be lower than the appliance maximum one.
• The socket must be easily accessible so that the plug can be
removed easily in an emergency.
a. Insert the plug in the power outlet.
b. Press "I" (ON) on the switch (7); the appliance is ready for use.
This product has a flap that opens automatically when the product
is turned on and closes automatically when turned off.
- Do not move the flap with your hands. -
As this could damage or deform the unit. Open the flap with your
hands only if it accidentally closes in part or in whole.

6.2 - Electrical connection

EN - 11
CALDO CRYSTAL