Configuration
Enabling/disabling switching via front buttons
In the defaults, you can use the buttons on the front panel to switch between the
computers.
If desired, you can deactivate the front buttons in the setup menu.
How to enable/disable switching via front buttons:
NOTE:
Use the setup menu to (de)activate the switching via front buttons.
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow
3. Press the
Space
Disables the switching via front button
Yes
Enables the switching via front button
No
4. Press the
S
25 · G&D TradeSwitch2-USB
or
Arrow
keys to select
key (repeatedly) to choose one of the following options:
key to save your settings.
Select Channel via Front Button
.