Herunterladen Inhalt Inhalt Diese Seite drucken

Changing The Select Keys - G&D TradeSwitch2-USB Installation Und Bedienung

Vorschau ausblenden Andere Handbücher für TradeSwitch2-USB:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Configuration

Changing the select keys

In the default settings, use the enabled select keys
computers that are connected to the KVM switch.
For instance, you can switch to computer 2 by pressing
How to choose a different select key set:
1. Press
Hotkey+Backspace
mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys shown below to activate the desired set of select
keys to switch the computers 1 to 2:
 Enables select keys 1 and 2
1
 Enables select keys NUM 1 and NUM 2
NUM 1
Z
 Enables select keys A and B
F1
 Enables select keys F1 and F2
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow
3. Press the
Space
switch the computers 1 to 2:
1 ... 2
NUM 1 ... 2
A ... B
F1 ... F2
4. Press the
S
21 · G&D TradeSwitch2-USB
(default:
or
Arrow
keys to select the
key (repeatedly) to enable the particular set of select keys to
 Enables select keys 1 und 2
 Enables select keys NUM 1 und NUM 2
 Enables select keys A und B
 Enables select keys F1 und F2
key to save your settings.
1
and
Hotkey+2
Alt Gr+Backspace
) to enable the setup
Select Key
2
to switch between the
(default:
Alt Gr+2
row.
).

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis