Safety instructions
Application as directed
Safety instructions
Disregarding the following basic safety measures and safety information may lead to severe
personal injury and damage to property!
Observe all specifications of the corresponding documentation supplied. This is the
precondition for safe and trouble-free operation and for obtaining the product features
specified.
Please observe the specific safety information in the other sections!
Basic safety instructions
Personnel
The product must only be used by qualified personnel. IEC 60364 or CENELEC HD 384 define
the skills of these persons:
They are familiar with installing, mounting, commissioning, and operating the product.
•
They have the corresponding qualifications for their work.
•
They know and can apply all regulations for the prevention of accidents, directives, and
•
laws applicable at the place of use.
Product
The product must never be technically modified!
If you carry out any technical modifications or alterations that are impermissible, all your
warranty claims will become void and the product liability will be excluded!
Process engineering
The procedural notes and circuit details described are only proposals. It is up to the user to
check whether they can be adapted to the particular applications. Lenze does not take any
responsibility for the suitability of the procedures and circuit proposals described.
Application as directed
The product must only be actuated under the operating conditions and power limits
•
specified in this documentation.
The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
•
The product is not a machine in terms of 2006/42/EU: Machinery Directive.
•
Commissioning or starting the operation as directed of a machine with the product is not
•
permitted until it has been ensured that the machine meets the regulations of the EC
Directive 2006/42/EU: Machinery Directive; observe EN 60204−1.
Commissioning or starting operation as directed is only permissible if the EMC Directive
•
2014/30/EU is complied with.
The product is not a household appliance, but is only designed as a component for
•
commercial or professional use in terms of EN 61000−3−2.
The product can be used according to the technical data if drive systems have to comply
•
with categories according to EN 61800−3.
In residential areas, the product may cause EMC interferences. The operator is responsible
•
for taking interference suppression measures.
Do not use the built-in brakes as fail-safe brakes. Disruptive factors that cannot be
•
influenced may cause the braking torque to be reduced.
The product must only be actuated with inverters.
•
36