Safety Instructions; Frequently Asked Questions - i-tec C31VGAHDMIADA Gebrauchsanweisung

USB-C to HDMI and VGA Adapter
CONNECTING A HDMI MONITOR
The adapter provides 1x HDMI 4K Ultra HD port for connecting external
screen or projector with HDMI interface. For displaying your images you
can use a modern plazma or LCD monitors and TVs. The graphic chip,
which is the heart of the docking station, supports up to 4K resolution
3840x2160/30Hz. Connect the monitor to the docking station using
a high-quality HDMI cable. During installation of an additional monitor the
screen of the notebook or tablet can flicker which is a standard condition.
CONNECTION A VGA MONITOR
The adapter provides 1x VGA Full HD port for connecting external screen
or projector with VGA interface. For displaying your images you can use a
plazma or LCD monitors and TVs. Connect the monitor to the docking station
using a VGA cable. During installation of an additional monitor the screen of
the notebook or tablet can flicker which is a standard condition.
It is not possible to use both graphic outputs simultaneously, a single monitor
only can be connected to the docking station (HDMI or VGA)

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity
• Use the device on flat surfaces – you will prevent it from slipping and
falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.

FREQUENTLY ASKED QUESTIONS

Question: On my MacBook 13" / 15" 2016 and later, wi-fi or Bluetooth stops
working; or USB 3.0 devices connected to the docking station disconnect.
Where is the problem?
Answer: This problem is caused by interference in the range of 2.4GHz.
A possible solution is to connect the docking station to the Thunderbolt 3
(USB-C) port of the Mac on the left side nearest to you or use the ports on the
right side. These ports are situated farthest from the wi-fi antenna. The next
solution is the use of the 5GHz zone and the placement of the docking station
as far as it could be from the monitor of your Mac. For more information, please
refer to: https://support.apple.com/en-gb/HT201163
6 | ENGLISH