Safety Instructions - i-tec U3METALG3HUB Gebrauchsanweisung

EN Quick Start / USB 3.0 HUB 3 Port + Gigabit Ethernet Adapter
To verify the driver of the adapter, follow the steps below to open the
Device Manager on mac
• Please connect the USB to LAN device to macBook / PC.
• Click the System Preferences → Network → USB Gigabit Ethernet
device active on line.
Note: If there is a
item, then the driver is not properly installed. Please delete the item,
unplug the adapter and repeat the installation steps.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping
and falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the
user manual.
FAQ
available on our website www.i-tec.cz/en/ on the „FAQ" tab of this
product.
10
®
(question) or (exclamation) mark next to that