Connecting An Displayport Monitor; Safety Instructions; Frequently Asked Questions - i-tec C31METALDP60HZ Gebrauchsanweisung

CAUTION!
Before installation make sure that your system has installed the latest drivers
for your device and updated BIOS.

CONNECTING AN DISPLAYPORT MONITOR

The adapter is equipped with 1x 4K DisplayPort for connection of an external
monitor or beamer with an DisplayPort interface. For displaying your images
you can use modern plazma or LCD monitors and TVs. The graphic chip,
which is the heart of the adapter, supports resolution up to 4K (Ultra HD)
3840 x 2160 pixels. Connect the monitor to the adapter using a high-quality
DisplayPort cable. During installation of an additional monitor the screen of
the notebook, tablet or PC can flicker which is a standard condition.
The majority of problems with the adapter and the connected peripheral
devices can be solved by disconnecting the USB-C cable of the adapter
from the USB-C port of the PC / Mac / smartphone and reconnecting after
approximately 10 s.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and
falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user
manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
Quick Start
ENGLISH | 5