Gigabyte SabrePro 15 Bedienungsanleitung Seite 15

Congratulations on your purchase of the GIGABYTE Notebook.
This manual will help you to get started with setting up your notebook. The final product configuration
depends on the model at the point of your purchase. GIGABYTE reserves the right to amend without
prior notice. For more detailed information, please visit our website at www.gigabyte.com
Using GIGABYTE Notebook for the First Time
1 Connect the power cord to the AC adapter.
2 Connect the AC adapter to the DC-in jack on the rear side of the notebook.
3 Connect the power cord to the power outlet.
IMPORTANT!
• Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the first time.
• When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily accessible.
• Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your power
adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU.
• Power adapter information: - Input voltage: 100-240Vac - Input frequency: 50-60Hz - Rating output voltage: 19.5V,9.23A
Switching on the Power :
After you turn on the Notebook for the
very first time, do not turn it off until the
operating system has been configured.
Please note that the volume for the audio
will not function until Windows® Setup
has completed.
1
2
3
1