Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER MANUAL
VOCAL MICROPHONE
Universal Dynamic Microphone
The OMNITRONIC
designed for stage and studio applications and is ideally suited for speech and vocals. The
microphone is supplied with amicrophone holder and a practical leatherette bag.
Safety Instructions
Ÿ
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Ÿ
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Setting into Operation
Connect the microphone via a connection cable to the XLR microphone input of your audio unit (e.g.
mixing console).
Screw the holder onto a stand with 1.5 cm thread. For stands with 1 cm thread use
the supplied adapter screw.
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Technical Specifications
Type:............................Dynamic
Directivity pattern: ........Cardioid
Frequency range:.........50 - 16,500 Hz
Impedance:..................600
Sensitivity: ...................-64 dB
Max. SPL: ..................150 dB
Connector: ...................3-pin XLR, bal.
Weight: ........................870 g
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
VM-100 S PRO
To switch on the microphone, set the sliding switch to the lower position.
W
is a dynamic microphone with cardioid characteristic
VM-100 S PRO
00052433.DOC, Version 1.0
www.omnitronic.com
Werbung
