Omnitronic VRM-1000 PRO Bedienungsanleitung

USER'S MANUAL
STUDIO MICROPHONE
Ribbon Microphone for recording excellent sound
The VRM-1000 PRO was designed for professional studio recording
Professional ribbon microphone with figure 8 pattern
2" aluminium ribbon (2 micron thick)
Ideal for recording studios, accoustic instruments, strings, horns, orchestras, e-guitars, drum
overheads and choral groups
Particularly suitable for recording musical instruments with high SPL (up to 165 dB) and large
dynamic range
3 m XLR cable attached to microphone
Safety Instructions
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used for
other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the device against humidity and heat. The ambient temperature must always be between
-5° C and +45° C. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Setting into Operation
Screw the shock mount on your microphone stand and insert the microphone from above.
Connect the microphone to the balanced XLR microphone input of your audio unit (e.g. mixing
console) using the attached microphone cable with 3-pin XLR plug.
For voice recordings, always use a windshield to protect the capsule from moisture.
Cleaning and Maintenance
For cleaning the microphone only use a soft lint-free and moistened cloth. Make sure not to allow any
water to enter the device and never use any solvent cleansers.
© Copyright
Nachdruck verboten!
Reproduction prohibited!
or live performances.
Delivery Includes
Technical Specifications
Ribbon type/Dimensions (LxW): ............2 microns pure aluminium/50 x 5 mm
Polar pattern: .........................................Figure 8
Frequency range: ..................................30 Hz - 18,000 Hz, ±3 dB
Nominal impedance: .............................<200 Ohms
Load impedance: ..................................1000 Ohms
Max. SPL: ..............................................165 dB (THD 1% @ 1 kHz)
Equivalent SPL: ....................................18 dBA
Sensitivity: .............................................-55 dB
S/N ratio: ...............................................70 dB
Connection: ..........................................3-pin XLR, balanced
Dimensions (Ø x L):................................68.5 x 185 mm
Weight: .................................................1.2 kg
frequency response (figure 8)
Please note: Every information is subject to change without prior notice. 10.05.2007 ©
VRM-1000 PRO
VRM-1000 PRO Ribbon Microphone
Padded bag
Aluminium case
Microphone support
3m XLR cable
polar pattern (figure 8) at 1 kHz
13030824_V_1_0.DOC
www.omnitronic.com