Jøtul F 370 Advance High Top Handbuch Seite 19

4.0 Assembly
Fig. 1
B
Remove the top plate (A) with the top grid (B).
Fig. 2
A
B
1. Unpack the High Top elements.
2. Remove the sector valve by tilting it out (C).
A
C
Fig.3
D
1. Place the High Top sides on the top of the burn chamber.
Make sure that the pins (Fig 2A) meet the holes in the
brackets (Fig 2B).
2. Mount the four screws (Fig 3D) previously removed.
Tighten well.
3. Remove the front panel (Fig 2A) by loosening the four
screws (M8x16) (Fig 2B).
4. With a top outlet, the flue pipe (Fig 3E) and the gasket (Fig
3F) have to be mounted now.
Fig. 4
With top outlet.
ENGLISH
E
F
19