Do not install the product by frost or high temperature. The outdoor temperature
should range between +5 °C and +25 °C. The fence panels should adapt to the
Assembly
The detailed description of the assembly of the fence can be found on pages 74-80.
Assembly on slopy underground
Set the fence posts into concrete when installing the fence on a slopy underground. All
posts need to be level. Following two installation options are possible:
A) The course of the fence panels is level at the top.
For this purpose, please cut the optionally available height compensation for the start profile
B3 to the adequate length to match the required height, and fit it into the post base A1 (a).
B) The posts and fence panels are installed stepped with offset
Caution
outside temperature before assembly.
a
a
EN
71