Set Posts In Concrete With Anchors - Konsta Wpc Gebrauchsanweisung

Set posts in concrete with anchors

To set the fence posts in concrete with the help of the anchors (optionally available) first
follow steps 1 to 3, then steps 4a and 5a (see below):
4a
5a
EN
70
(optional)
Put the posts on to the post anchors and fix
them with screws.
Put the posts with the anchors upright into
the holes and align them with the help of a
spirit level. Fill concrete into the holes and
compact it with a timber beam!
Fix the posts in the correct position with
the help of poles and clamps.and let the
concrete harden thoroughly (Observe the
indications on the packaging).
Find the further steps on pages 75 to 80,
beginning with step 6.