Cutting Fence Panels; Care And Maintenance - Konsta WPC Gebrauchsanweisung

Do never cut aluminium or steel with an angle grinder! The material can burn and

Cutting fence panels

Seal the cutting surfaces with standard clear varnish to avoid rust.
WPC Profile:
For cutting the fence panels, use a cutting
tool for hardmetal.

Care and maintenance

• Do not use oil, mordant or paint to
clean the product.
• Deviations of the surface colour that
are within a common range in respect
to material and production lines do not
constitute a reason for objection.
• Remove bird droppings and fallen
leaves from the surfaces, as they can
cause durable stains on the product.
• Store elements that are not being used
dry and protected from direct sunlight
to avoid staining or deformation of the
product.
• WPC-surfaces: In case the product
is dirty or mouldy, clean with mild,
EN
72
Caution
the coating can flake off.
Alu/Rhombus:
Cut aluminium or steel parts with a chop
saw with a fine-toothed blade for metal or
a hacksaw.
vinegar-based detergent and warm
water. Never use caustic agents to
clean plastic parts, as the product
can be damaged. Due to the high
percentage of natural fiber, the product
absorbs humidity and releases it
again when heated. Thermal related
fluctuations are the result.
• Aluminium surfaces: To protect the
high-end aspect of your product, clean
the surfaces only with mild, vinegar-
based detergent and warm water. Do
not use cleaning agents containing
solvent or chalk, since the lacquer coat
of the aluminium might come off.