Herunterladen Inhalt Inhalt Diese Seite drucken

Qlima LK 2035 Gebrauchsanweisung Seite 39

Guarantee 2 years
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
If you fail to consult and/or follow up the
rules, instructions and explanation, the
warranty will no longer be valid, and the
manufacturer will no longer deal with
any damage to the appliance and/or your
environment under the warranty.
OPERATION GUIDE
1.
Open the package and take the machine out. Check the content with on
Instruction Manual .
2.
The unit should be placed on a level surface and must always stand in a verti-
caposition. Check the power supply of the correct rating. (Refer to the name-
plate located at the back side of the unit).
3.
Filling water: When the machine is new or unused for a long period, it is
necessary to fill in clean water before using. Be sure to unplug the unit befo-
re filling water for preventing electrical parts from damage. Open the water
tank lock and pull out the water tank, then fill the water into tank.
Notice that the water does not exceed the maximum set level.
4.
Storage: In case the unit is unused for a long time, the water tank should be
drained out and keep the unit running with fan only for a period. Especially
the strainer should be entirely dry. Pack it with plastic bag and
put it in box.
FUNCTIONS OF ALL BUTTONS
Connect in the power, the initial power-on buzzer issued "Pi" sound, the power
indicator light red enter standby state.
SWITCH: Press the power button with sound "PI-", the unit starts from medium speed.
After 3 seconds, the unit automatically shifts to low speed, and the low speed indicator
lights. Press the power button again, the unit shuts off. The working state before shut
off will maintain to next operation. Timer mode without memory function.
SPEED: Continuously press the button, the wind speed shifts from low, medium, and
high, and indicator lights accordingly.
SWING: Press swing button to turn on or off the swing function and the indicator
lights on or off.
COOL: Press the cool button to achieve cool function and the indicator lights on or off.
TIMER:Press the timer button to set timing of 1-2-3-4-...7 hours, corresponding indica-
tor lights. Timing function is off when the timing indicator is off.
4
39

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis