Herunterladen Inhalt Inhalt Diese Seite drucken

Before First Use; How To Use; Helpful Hints - h.koenig TOPC912 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15

BEFORE FIRST USE

• Read all instructions carefully and keep them for future reference.
• Remove all packaging.
• Clean the Cooking Plates by wiping with a sponge or cloth dampened in warm water.
DO NOT IMMERSE THE UNIT
AND DO NOT RUN WATER DIRECTLY ONTO THE COOKING SURFACE.
• Dry with a cloth or paper towel.
• Lightly coat the cooking plates with a little cooking oil or a cooking spray.
NOTE: When your Rotary Waffle Maker is heated for the first time, it may emit slight
smoke or odor. This is normal with many heating appliances. This does not affect the
safety of your appliance. However, it may affect the flavor of the first set of waffles
prepared in your waffle maker, and it is recommended that you discard these.
DO NOT IMMERSE THE HEATING BODY OF THE ROTARY WAFFLE
MAKER IN WATER OR ANY OTHER LIQUID!

HOW TO USE

• Press on/off button(red/power light, and blue/adjust light), after one long ring, the
LCD display reads 190℃ with the moving letter "C" , the machines starts to preheat.
When plate temperature reaches 190℃, you can notice the"C" stops to move and it
reads 03:30 on the LCD display. During the preheating process, time/temperature
button do not work. And the LCD display is shut off if no operation for the
time/temperature button within 20 minutes
• After the preheating, you can press the time/temperature button, and LCD reads
03:30~04:00
~04:30
~05:00~04:30
~04:00~03:30
&
190℃~200℃~210℃~220℃~230℃~220℃~210℃~200℃~190℃. If no operation for the
button within 5 seconds, the machine exit and save automatically
• After the setting, it works to count down as the set time and temperature with the
adjust light "off". The working finishes after the three long rings. The working time and
temperature scope can be adjusted during the working process ,and time
increases/decreases 30 seconds, and temperature increases/decreases 10℃
• After the set working ends, it keeps to heat as the set temperature. and it is standby
model if no more operation within 20 minutes with one long ring. And the LCD reads
120℃,and it keeps 5 seconds.
•During the standby model, LCD/adjust light is shut off, and power light keeps on. If it is
reused after the press to the on/off button, the machines re-starts to preheat, and you
can bake the waffle as your further operation..
• Once the waffles cooked, carefully remove them from the waffle maker with a
non-metallic utensils. Never touch the cooking surface with sharp, pointy or metal
objects. This could damage the no-stick surface.
• Once you are finished cooking, disconnect the plug from the wall outlet and leave the
waffle maker open to cool.

HELPFUL HINTS

• Do not over mix batter or waffles will be tough. Stir batter only until large lumps of dry
ingredients disappear.
• The optimal amount of batter to produce a full-shaped waffle, without overflowing, will
vary with different waffle batters. Pouring batter from a measuring cup will help you
gauge how much batter to use each time. Fill bottom grid of waffle maker with enough

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis