Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Interlogix TX-2344-03-1 series Installationsanleitung

Drahtloser pir-melder mit einer integrierten kamera
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10

Specifications

Power supply
Power supply by batteries
Battery type
Power supply by 12 V
Supply voltage
Peak-to-peak ripple immunity
Current consumption:
Average standby
Maximum (without IR
LEDs)
Maximum (with IR LEDs)
Maximum current limit
General
Wireless communication
Operating temperature
Relative humidity
Weight
Dimensions (H x W x D)
IP/IK rating
Pry-off tamper
Detector
Detection technology
Signal processing
Range
Viewing angle
PIR optics
Memory function
Detector start-up time
Mounting height
Target speed range
Camera
Resolution
Viewing angle
F-number
IR light
Picture write cycles
Regulatory information
Manufacturer
PLACED ON THE MARKET BY:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
AUTHORIZED EU REPRESENTATIVE:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Certification
6 / 42
Batteries
— or —
Batteries and 12 V
3X DL123A
9 to 15 V
(13.8 V typical)
2 V (at 12 V )
50 µA
90 mA
390 mA
1 A
LDR channel: 868 MHz GEN2
HDR channel: 2.4 GHz
−10 to +55°C (14 to 130°F)
95% max., noncondensing
165 g
130 x 69 × 53 mm
IP30 IK04
On-board (yes)
PIR
V2E
6 and 12 m selectable with mirror
blinders
78°
9 high-density mirror curtains
Yes
60 s
1.8 to 3.0 m
0.2 to 3.0 m/s
VGA/QVGA
90°
2.4
12 LEDs, automatic activation
10 million max. for 20 kB average
VGA picture size
3.3 million max. for 60 kB maximum
VGA picture size
EN 50131-2-2: Security Grade 2,
Environmental class II
Tested and certified by Telefication B.V.
UTC Fire & Security hereby declares that this device is
in compliance with the applicable requirements and
provisions of one or more of the Directives 1999/5/EC,
2014/30/EU and 2014/35/EU. For more information
see www.utcfireandsecurity.com or
www.interlogix.com.
2002/96/EC (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more
information see: www.recyclethis.info.
Contact information
www.utcfireandsecurity.com or www.interlogix.com.
For customer support, see www.utcfssecurityproducts.eu
DA: Installationsvejledning
Beskrivelse
TX-2344-03-1 / TX-2344-03-1-N er en trådløs PIR-detektor
med et indbygget kamera. Den kombinerer den patenterede
PIR-spejloptikteknologi og den trådløse billedtransmission.
Generelle retningslinjer
Se figur 2.
Kameraet er beregnet til vægmontering, men det kan også
loftmonteres ved hjælp af et monteringsbeslag.
Brug de følgende retningslinjer for at finde den bedste
placering til installation af kameraet.
Montér kameraet, så en indbrudstyvs forventede
bevægelse går på tværs af detekteringsmønstret (se
figur 7).
Montér kameraet på en stabil overflade i en højde på
mellem 1,8 m og 3,0 m over gulvet.
Montér ikke kameraet inden for en afstand på 0,5 m fra
metalgenstande og 1,5 m fra lysstofarmaturer.
Placér ikke genstande foran kameraet, som kan forhindre
en direkte synslinje.
Placér kameraer mindst 1 m fra hinanden.
PIR-teknologiens funktion i denne detektor er meget
modstandsdygtig over for falske alarmer. Ikke desto mindre
skal du undgå mulige årsager til ustabilitet, f.eks.:
Direkte sollys på detektoren
Varmekilder inden for detektorens synsfelt
Kraftig træk på detektoren
Dyr i synsfeltet
Blokering af detektorens synsfelt med store genstande
som f.eks. møbler
Vi anbefaler, at kameraet regelmæssigt gangtestes og
kontrolleres på centralen.
P/N 1078288 (ML) • REV C • ISS 31MAR15

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tx-2344-03-1-n

Inhaltsverzeichnis