EuroLite MULTIFLOOD PRO IP SMD RGBW STROBE/WASH Bedienungsanleitung Seite 29

Info
In this mode, several settings can be read out or set.
1 Press the MODE button so many times until Info is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to select the desired setting and confirm with the ENTER button. The
desired setting will be executed.
Test 1: The device conducts a test.
Test 2: The device conducts a test.
Reset: With this function, you can reset the device via the Control Board (yes/no).
Version: With this function, you can display the software version of the device.
With the MODE button you can return to the main menu.
Dimmer curve
With this function, you can set various dimmer curves.
1 Press the MODE button so many times until Dimmer curve is indicated in the display. Confirm with the
ENTER button.
2 Use the buttons UP and DOWN to select the desired Dimmer curve and confirm with the ENTER button.
Curve 0 - LINEAR: The brightness increases linearly with the DMX value.
Curve 1 - SQUARE LAW: The brightness increases exponentially with the DMX value.
Curve 2 - INVERSE SQUARE LAW: The brightness increases reverse exponentially with the DMX value.
Curve 3 - S-CURVE: The brightness increases S-shaped with the DMX value.
Linear
With the MODE button you can return to the main menu.
Fade time
With this function, you can set the fade time.
1 Press the MODE button so many times until Fade time is indicated in the display. Confirm with the
ENTER button.
2 Use the buttons UP and DOWN to select the desired fade time 00 (fast) to 07 (slow) and confirm with
the ENTER button.
With the MODE button you can return to the main menu.
29/36 00121741.DOCX, Version 1.0