Antari DNG-200 Bedienungsanleitung Seite 3

-Introduction
Thank you for choosing the Antari DNG-200 Low Fog Generator! The machine has some
terrific new features on top of the fog cooling provided by the DNG-100 originally. The fog
generator is integrated into this new machine to make sure the machine will not take too
much space in order to maximize the usage of the entire stage.
Different from others, Antari's fog machines do not use carbon dioxide, and do not pollute
environment and and are not harmful for human health. The DNG-200 is a great machine
that offers low fog special effects as well as environmental-friendly features, a true green
machine.
Please follow these operation, safety and maintenance instructions to ensure a long and
safe life for your low fog machine.
Pay attention to all warning labels and instructions printed on the exterior of
-Safety Instructions
Keep this device dry.
For indoor use only. Not designed for outdoor use.
The ideal operating temperature is between 10° and 30° Celsius.
Two sets of professional power cords are used by this machine. It is important to confirm
the electrical voltage before plugging the power cord into the power outlet. Use a three-
plug grounded power outlet.
If the machine is moved or transported, it shall be stationed for one hour to allow the
coolant in the cooler to stabilize before using it again.
If the machine is moved horizontally, please station it for 5 minutes before starting the
operation again.
Please unplug the power cord or turn off the machine if it is not in use.
This machine is not water-proof. If moisture, water, or fog fluid gets inside the housing,
immediately unplug the unit and clean it. If the machine cannot be cleaned, please
contact a service technician or your Antari dealer before using it again.
No user serviceable parts inside. Refer to your Antari dealer or other qualified service
personnel.
For adult use only. The fog machine must be installed out of the reach of children. Never
leave the unit running unattended.
Operate the machine in a well-ventilated area. Never cover the unit's vents. The fog
machine is best installed 1 meter away from all objects.
It is important to place the machine on a flat surface instead of a surface with slope to
prevent any moving of the machine.
User Manual
Antari DNG-200 Low Fog Generator
Congratulations on the purchase of your new
ANTARI DNG-200 Low Fog Generator
your ANTARI machine.