Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G
®
KINASGARD
RBWF
The motion sensor ⁄ presence detector KINASGARD
presence of persons and motions and has a switching output (changeover
contact). The sensor detects motions over an aperture angle of 110° and a
perimeter of 360°. Because of the patented lens system with 20 individual
lenses, only very small dark areas are resulting, which even at a distance of
10 m are only a few centimeters wide, safely detecting also small motions.
Elegant enclosure made of plastic with snap-on lid, base with 4-hole attach-
ment for installation on vertically or horizontally installed in-wall flush boxes,
with predetermined breaking point for on-wall cable entry in case of on-wall
installation. The room motion sensor is used for the observation and recogni-
tion of conditions and for the motion-dependent control of room functions, e.g.
for lowering temperatures in unused rooms as motion detector. This residen-
tial room motion detector is installed in corridors, in outdoor areas, in indus-
trial halls, in offices, in residential rooms and business facilities.
TECHNICAL DATA:
Power supply: .............................. 24 V AC ⁄ DC
Sensor: ......................................... infrared motion sensor
Detection range: ........................ perimeter 360°, aperture angle 90° ⁄ 110°,
Motion detection: ....................... of persons and objects, necessary temperature
Output: ......................................... without ⁄ with motion,
After-running time: .................... adjustable von 4s to 16 min
Ambient temperature: .............. 0 ...+ 50 °C
Electrical connection: ................ 0.14 - 1.5 mm²,
Enclosure: .................................... plastic, material ABS,
Dimensions: ................................. 85 x 91 x 27 mm (Frija I )
Mounting: ..................................... wall mounting or on in-wall flush box, Ø 55 mm,
Protection class: ........................ III (according to EN 60 730)
Protection type:.......................... IP 30 (according to EN 60 529)
Standards: ................................... CE conformity,
Type ⁄ WG1
Detection
Presence ⁄ Motion
RBWF - W
Yes ⁄ No
®
RBWF detects the
reach ca. 10 m, circular
difference between subject and ambience ≥ 5 K
potential-free changeover contact (24 V)
via terminal screws on circuit board
colour pure white (similar RAL 9010),
optional stainless steel
base with 4-hole for mounting on vertically or horizontally
installed in-wall flush boxes for cable entry from the back,
with predetermined breaking point for on-wall cable entry
from top ⁄ bottom in case of plain on-wall installation
electromagnetic compatibility
according to EN 61 326 + A1 + A2,
EMC directive 2004 ⁄ 108 ⁄ EC
Schematic diagram
min. max.
Connecting diagram
1
2
5
6
7
Output
Changeover contact
Setting time interval
4''
16'
1 2
5 6 7
UB- GND
UB+ supply voltage 24V AC/DC
Normally open
contact
Breaker
RBWF
RBWF
Werbung
