Auto-Recharge Function; Ssw System Mode; Normal Cleaning Pattern - Mami Robot pporo Bedienungsanleitung

Auto-Recharge Function

1. When you press Auto-Recharge Button on main body or on the remote control, MamiRobot stops it's work and returns to the
charging station to recharge its battery.
2. While MamiRobot moves to the charging station, [doc] is shown in status display window. During the recharging, charging
indication[Chr] is turned on at status display window. If you select scheduled cleaning at this situation, the time delay will be
shown in status display window.
3. When charging is complete, [FU] and [LL] will be displayed in the status display window.
4. If you press the other buttons while it is returning to the charging station or recharging, MamiRobot will operate those selected
functions by priority. However, if you have selected scheduled cleaning before, MamiRobot will deny other commends with an-
nouncement of scheduled cleaning. In this case, you can give the other command by cancelling of scheduled cleaning function.
5. You can cancel the scheduled cleaning by pressing backwards Directional Button(▼) until [ - - - ] is shown in the status
display window.
6. If you have selected scheduled time, MamiRobot stands by until selected time is passed at the charging station.
7. Docking at the charging station can be failed by following reasons : full-discharged battery, trouble with charging station,
trapped by an obstacle or trouble with main body. In this case, [End] is displayed in status display window, and it is turned
out in 2 min.

SSW System Mode

With SSW(Spider Spinning Web), MamiRobot measures the dimension of space that needs to be cleaned at first and then
cleans up compactly and neatly. This cleaning mode will be operated by pressing [SSW] button on the remote control.
Step 1 _ Going round
corners, it estimates the
layout, location and
course of space and
prepares calculation of
total space.
Normal Cleaning
Pattern
1. MamiRobot uses the six steps for cleaning the area.
※ Each step takes around 2 min.
2. During cleaning, you can select Spiraling step or Wall
Following step additionally. In this case, selected
step will be operated around 2 min, and MamiRobot
will continue working with next step.
Step 2 _ It takes 3 Step 3 _ After
min. to run Free mode determining the size of
where it calculates total circle according to the
number of obstacles calculated room size,
and also the size of a
room.
Step 4 _ It goes to Step 5 _ It determines
the edge of calculated the size of circle to fit
room and gets ready into the room size and
for the last 5th stage, proceeds cleaning with
Cleaning mode. rotating.
① Spiraling
⑥ Random Moving
⑤ Gridded Moving
Random Moving
④
② Random Moving
③ Wall Following
23
ENGLISH