Empty Dust Bin And Replace Dust Filter; Maintain Side Brushes - Mami Robot pporo Bedienungsanleitung

Empty Dust Bin and Replace Dust Filter

1. Press dust bon cover release and pull to remove bin. You can empty
and clean dust bin easily.
2. For restraining the propagating of germs, clean dust bin with a pH-
neutral detergent and rinse it with water.
3. After drying dust bin at good ventilation, install it in main body.
4. Remove dirty dust filter through separating upper filter compartment and
under filter compartment as shown in Figure. Replace new dust filter as
shown in Figure.
5. Combine filter compartment with dust bin, and install it in main body
with closing dust bin cover until it "clicks" into place.
compartment is facing downwards.

Maintain Side Brushes

Because the side brushes easily attract hair and other foreign substances, we
recommend cleaning them frequently. Cleaning efficiency may decrease due
to excessive foreign substances on the side brushes.
Remove the screw of the side brush turning in anticlockwise direction with
(+) driver. Be careful when you remove the side brush. Using (-) driver may be
helpful. Remounting is carried out in reverse order.
The longer pin(+) of the lower
Put dust filter in lower compartment.
Combine upper compartment with
compartments of previous step.
ENGLISH
19