Notice for Battery Installation
1. Place MamiRobot upside down on a flat, padded surface such as on a
towel or blanket. Press and slide the battery cover as shown in Figure.
2. Insert the battery plug into the socket as shown in Figure.
3. Place the Rechargeable Battery in the battery repository and close the
battery cover after well arrangement of cords.
4. Dismounting is carried out in reverse order.
Battery plug
Click!
Battery socket
Installation of Charging Station
1. Locate charging station in an even surface and stand it against the wall as shown in Figure. For the auto-recharging,
make sure there is no obstacle within 1.5 m radius.
2. After inserting adapt terminal into the charging station, plug the power cord in the power socket.
18
ENGLISH
Insert the plug into the socket
O
X
Correct installation
Wrong installation