When Using The Projector By Mounting It To A Ceiling - Sony VPL-DX271 Kurzreferenz

When Using the
Projector by
Mounting It to a
Ceiling
Removing the lens cap
If the lens cap is unnecessary when
mounting the unit to the ceiling, remove it.
Pull the string of the lens cap a little bit
strongly to remove it from the unit. If the
lens cap is necessary, insert the edge of the
string into the hole.
Lens cap
String
28
GB

When Using the Projector by Mounting It to a Ceiling

Attaching the dust cover
When mounting the projector to the ceiling,
you can attach the dust cover to the unit to
avoid dust from piling in the air filter.
Place the air filter cover so that the dust
cover covers the air filter cover then insert
the four claws (inside of the dust cover) into
the holes of the air filter cover.
Claw
Hole
Claw
Dust
cover
Air filter
cover