Maintenance - Apex Sedens 500 Gebrauchsanleitung

Sedens500/English

7. Maintenance

7.1 General
1. Check main power cord and plug if there are abrasions or excessive wears.
2. Check mattress cover for signs of wear or damage. Ensure mattress cover and tubes are
stubbed together correctly.
3. Check the air hoses for any kink or break. For replacement, please contact your local
dealers.
7.2 Battery Pack Replacement
To replace the battery pack, follow the instructions below.
1. Remove the AC power source & disconnect the DC
plug.
2. Open the battery cover by removing the screw on the
back of the pump unit.
3. Take out the battery pack by pulling the cable
connector.
4. Plug in the new battery pack connector and insert
the battery pack.
5. Put the cover on and screw back.
6. Connect the pump to a power outlet using the
included cable and power adaptor to recharge the
battery.
12