Inhaltsverzeichnis
Werbung
FAQ and Troubleshooting \ Häufig gestellte
Fragen und Problemlösung \ FAQ & Guide de
dépannage \ Domande poste di frequente e
Risoluzione dei problemi
Symptom
Eclean won't start charging
after returning to the
1
recharging dock,
or couldn't approach the
recharging dock.
The remote control is not
2
working.
The side brush is curled
3
after cleaning.
Eclean keeps moving
4
backward.
Eclean's side brushes are
5
trapped and stopped by
cables and phone lines.
Eclean stopped on the
6
dark-colored carpet.
Cannot clean certain large
7
objects.
8 Error indicator lights up.
Cause
1. The recharging dock is not
attached to the wall.
2. The recharging dock is placed
under a halogen lamp.
3. There's not enough space for
Eclean to return to the recharging
dock.
1. Battery is not installed.
2. Battery is installed reversely.
3. Battery is discharged completely.
Caused by the cleaning or packing
process.
The sensor is blocked by dust or
foreign objects.
There are cables or cords on the floor.
The light from the sensor couldn't
reflect, disabling the sensor from
receiving any signal.
The objects are larger than the dust
suction entrance.
The wheels are jammed or Eclean has
been lifted up.
- 2 2-
Solution
Check the indicator on Eclean.
If the charging indicator isn't
flashing white, please check
against the "causes". If Eclean
still cannot recharge, please
return the product for service.
Install the battery properly or
replace it with a new one.
Soak it in hot water.
Clean the sensor.
Please remove foreign objects
from the floor, such as phone
lines, cables, clothes and cords.
Keep away from black or dark-
colored carpet.
Use other cleaning methods.
Remove the object that jammed
Eclean, or put Eclean back onto
the floor.
Werbung
Inhaltsverzeichnis
