Inhaltsverzeichnis
Werbung
WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
the third-party overclocking tools. Overclocking may affect your system stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
CAUTION!
1.
Some CPU you adopt may be overclocked to FSB2000 MHz.
2.
About the setting of "Hyper Threading Technology", please check page
61 of "User Manual" in the support CD.
3.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 36 for details.
4.
This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 17 for proper
installation.
5.
Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency
1600
1333
1066
800
6.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows
64-bit with 64-bit CPU, there is no such limitation.
7.
DTS (Digital Theater Systems) is a multi-channel digital surround sound
format. To enable DTS function, you need to adjust the settings after
audio driver installation. Please refer to "DTS Operation Guide" on page
34 for details.
8.
For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-
channel, 6-channel, and 8-channel modes. Please check the table on
page 4, 5 and 6 for proper connection.
9.
Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 39 of "User Manual" in the
support CD to adjust your SATAII hard disk drive to SATAII mode. You can
also connect SATA hard disk to SATAII connector directly.
10. This motherboard supports eSATAII interface, the external SATAII
specification. Please read "eSATAII Interface Introduction" on page 30
for details about eSATAII and eSATAII installation procedures.
11. Power Management for USB 2.0 works fine under Microsoft
TM
Vista
64-bit / Vista
1 2
1 2
1 2
1 2
1 2
ASRock P45XE-WiFiN / P45XE-R / P45XE Motherboard
Memory Support Frequency
DDR2 800, DDR2 1066, DDR2 1200
DDR2 667, DDR2 800, DDR2 1066
DDR2 667, DDR2 800, DDR2 1066
DDR2 667, DDR2 800
®
Vista
TM
. For Windows
®
XP 64-bit and Windows
TM
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
®
XP
®
Vista
TM
®
®
Windows
Werbung
Inhaltsverzeichnis
