Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 39
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2008 ASRock INC. All rights reserved.
ASRock Penryn1600SLIX3-WiFi Motherboard
Published February 2008
1 1 1 1 1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK Penryn1600SLIX3-WiFi

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 PCI Express x16 Slot (PCIE1, White) SATAII Connector (SATAII_1 (PORT1.0)) WiFi/E Header (WIFI/E) 8Mb LPC Flash ATX Power Connector (ATXPWR1) System Panel Header (PANEL1) eSATAII Connector (eSATAII_TOP) USB 2.0 Header (USB6_7, Blue) 2 2 2 2 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 3 “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. 3 3 3 3 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 4 Software Support - ASRock WiFi-802.11g Wizard If you want to start to use ASRock WiFi-802.11g module on this motherboard, please carefully read “ASRock WiFi-802.11g Module Operation Guide” in the package for the detailed introduction and operation procedures. You can also read the document in the following path of ASRock motherboard support CD: ..\ ASRock WiFi-802.11g \ Vista64_Vista_XP64_XP...
  • Seite 5 In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com If you require technical support related to this motherboard, please visit our website for specific information about the model you are using.
  • Seite 6 - Gigabit LAN 10/100/1000 Mb/s - Giga PHY Realtek RTL8211B - Supports Wake-On-LAN Wireless LAN - ASRock WiFi-802.11g module - 54Mbps IEEE 802.11g / 11Mbps IEEE 802.11b - Supports Software Access Point mode (AP mode) and Station mode (Infrastructure mode and Ad-hoc mode)
  • Seite 7 - CPU, DRAM, NB, SB, VTT Voltage Multi-adjustment Support CD - Drivers, Utilities, AntiVirus Software (Trial Version) Unique Feature - ASRock OC Tuner (see CAUTION 13) - Hybrid Booster: - CPU Frequency Stepless Control (see CAUTION 14) - ASRock U-COP (see CAUTION 15) - Boot Failure Guard (B.F.G.)
  • Seite 8 64-bit compliant (see CAUTION 16) Certifications - FCC, CE, WHQL * For detailed product information, please visit our website: http://www.asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the third-party overclocking tools.
  • Seite 9 (WLAN) adapter. It allows you to create a wireless environment and enjoy the convenience of wireless network connectivity. 13. It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware ®...
  • Seite 10 * Currently, only NVIDIA SLI-Ready GeForce 8800 Ultra and GeForce 8800 GTX graphics cards support 3-Way SLI Mode. For the latest updates of the supported PCI Express VGA card list for 3-Way SLI Mode, please visit our website for details. ASRock website: http://www.asrock.com/support/index.htm ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 11 CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 12 Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 13 Step 5. Connect fan header with the CPU fan connector on the motherboard. Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 14 Channel, for example, installing a pair of memory modules in DDRII_1 and DDRII_2, it is unable to activate the Dual Channel Memory Technology . It is not allowed to install a DDR memory module into DDR2 slot; otherwise, this motherboard and DIMM may be damaged. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 15: Installing A Dimm

    DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 16: Installing An Expansion Card

    If you plan to install only one PCI Express VGA card on this motherboard, please install it on PCIE1 slot. If you want to use ASRock DeskExpress function on this motherboard, please install ASRock PCIE_DE card on PCIE4 slot. Installing an expansion card...
  • Seite 17 If required, connect the auxiliary power source to the PCI Express graphics cards. Step3. Align and insert the SLI Bridge to the goldfingers on each graphics card. Make sure that the SLI Bridge is firmly in place. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 18 Make sure that the 3-Way SLI Bridge is firmly in place. Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE1 slot. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 19 B. From the pop-up menu, select nView Desktop Manager, and then click nView Properties. C. From the nView Desktop Manager window, select the Desktop Management tab. D. Click Properties to display the Display Properties dialog box. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 20 E. From the Display Properties dialog box, select the Settings tab then click Advanced. F. Select the NVIDIA GeForce tab. G. Click the slider to display the following screen, then select the SLI multi-GPU item. H. Click the Enable SLI multi-GPU check box. I. Click OK when done. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 21 E. From the pop-up menu, select Set SLI configuration, and click Apply. Then choose Enable SLI technology (recommended). * SLI appearing here is a registered trademark of NVIDIA ® Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 22 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear- CMOS action. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 23 SATAII_6 (PORT3.1) connector can be used for internal storage de- vice or be connected to eSATAII connector to support eSATAII device. Please read “eSATAII Interface Introduction” on page 29 for details about eSATAII and eSATAII installation procedures. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 24 USB 2.0 Headers Besides four default USB 2.0 ports on the I/O panel, there are (9-pin USB6_7) two USB 2.0 headers on this (see p.2 No. 19) motherboard. Each USB 2.0 header can support two USB 2.0 ports. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 25 Realtek HD Audio Manager. ® For Windows 2000 / XP / XP 64-bit OS: Click “Audio I/O”, select “Connector Settings” , choose “Disable front panel jack detection”, and save the change by clicking “OK”. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 26 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13. 20-Pin ATX Power Supply Installation ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 27 HDMI_SPDIF header on the motherboard. Then connect the white end (B or C) of HDMI_SPDIF cable to the HDMI_SPDIF connector of HDMI VGA card. A. black end B. white end (2-pin) C. white end (3-pin) tion ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 28 Connect the HDMI output connector on HDMI VGA card to HDMI device, such as HDTV. Please refer to the user manual of HDTV and HDMI VGA card vendor for detailed connection procedures. Step 5. Install HDMI VGA card driver to your system. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 29 HDD as a RAID disk, please set “SATA Operation Mode” option in BIOS setup to RAID mode and disable the option “eSATAII Support”. 4. Please refer to page 33 to 35 for detailed information of RAID mode and non-RAID mode. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 30 Use the eSATAII device cable to connect eSATAII device and the eSATAII port of the I/O shield. Connect one end of the eSATAII Connect the other end of the eSATAII device cable to eSATAII device device cable to eSATAII port of the I/O shield ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 31 Please visit HITACHI’s website for details: http://www.hitachigst.com/hdd/support/download.htm The above examples are just for your reference. For different SATAII hard disk products of different vendors, the jumper pin setting methods may not be the same. Please visit the vendors’ website for the updates. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 32 Currently, the SATA RAID driver does not support Hot Plug and Hot Swap functions under Windows ® Vista and Vista 64-bit OS. Please visit our website for the driver update in the near future. ASRock website: http://www.asrock.com ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 33 2000 to your system, your Windows ® 2000 optical disk is supposed to include SP4. If there is no SP4 included in your disk, please visit the below website for proper procedures of making a SP4 disk: http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy. htm#the_integrated_installation_fmay ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 34: Installing Windows

    SATA / SATAII HDDs with RAID functions, please follow below steps. STEP 1: Make a SATA / SATAII Driver Diskette. Insert the ASRock Support CD into your optical drive to boot your system. During POST at the beginning of system boot-up, press <F11> key, and then a window for boot devices selection appears.
  • Seite 35 ® Vista 64-bit OS on your system. When you see “Where do you want to install Windows? ” page, please insert the ASRock Support CD into your optical drive, and click the “Load ® ® Driver” button on the left on the bottom to load the NVIDIA RAID drivers.
  • Seite 36 DTS-format soundtracks and music mixes dramatically improves content. Please follow below steps to enable DTS function: 1. Install the drivers to your system from ASRock support CD. 2. Reboot your system. 3. You will find the icon (Realtek HD Audio ®...
  • Seite 37 Cinema Mode The Cinema mode is for use with stereo television shows and all programs encoded in DTS Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 7.1-channel sound. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 38 Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP. EXE” from the BIN folder in the Support CD to display the menus. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 39: Einführung

    1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock Penryn1600SLIX3-WiFi Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 40: Spezifikationen

    - Gigabit LAN 10/100/1000 Mb/s - Giga PHY Realtek RTL8211B - Unterstützt Wake-On-LAN Drahtloses LAN - ASRock WiFi-802.11g Modul - 54Mbps IEEE 802.11g / 11Mbps IEEE 802.11b - Unterstützt Software Zugriffspunkt Modus (AP Modus) und Stationsmodus (Infrastruktur Modus und Ad-hoc Modus) E/A-Anschlüsse...
  • Seite 41 - Zentraleinheit, DRAM, NB, SB, VTT Stromspannung Multianpassung Support-CD - Treiber, Dienstprogramme, Antivirussoftware (Probeversion) Einzigartige - ASRock OC Tuner (siehe VORSICHT 13) Eigenschaft - Hybrid Booster: - Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 14) - ASRock U-COP (siehe VORSICHT 15) - Boot Failure Guard (B.F.G. – Systemstartfehlerschutz)
  • Seite 42 Funktion nutzen zu können, installieren Sie zwei identische SLI Grafikkarten an den PCIE1 und PCIE3 Steckplätzen. Falls Sie die 3-Way SLI Funktion nutzen möchten, installieren Sie drei identische 3-Way SLI unterstützende Grafikkarten an den PCIE1, PCIE3 und PCIE5 Steckplätzen. Informationen über ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 43 64-Bit / Vista / XP 64-Bit / XP SP1 oder SP2/2000 SP4 einwandfrei. 12. WiFi/E Sockel unterstützt WiFi+AP Funktion mit ASRock WiFi-802.11g oder WiFi-802.11n Modul, einem einfach zu bedienenden Wireless Local Area Network (WLAN) Adapter. Damit sind Sie in der Lage, ein drahtloses Netzwerk aufzubauen und die Vorzüge drahtloser...
  • Seite 44: Minimale Hardwarevorausetzungen Für Windows

    128 Bit-VGA-Speicher (Premium) mit 64 Bit-VGA-Speicher (Basic) * Nach dem ersten Juni, 2008 sind , all Windows ® Vista Systems dafür erforderlich, mit der Minimalforderung der obengenannte Hardware übereinzustimmen, um Windows ® Vista Premium 2008 logo.zu befähigen. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 45: Sicherheitshinweise Vor Der Montage

    Bevor Sie die 775-Pin CPU in den Sockel sitzen, prüfen Sie bitte, ob die CPU-Oberfläche sauber ist und keine der Kontakte verbogen sind. Setzen Sie die CPU nicht mit Gewalt in den Sockel, dies kann die CPU schwer beschädigen. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 46 775-Pin Sockel 775-Pin CPU Um die CPU ordnungsgemäß einsetzen zu können, richten Sie die zwei Orientierungskerben der CPU mit den beiden Markierungen des Sockels aus. Schritt 2-3. Drücken Sie die CPU vorsichtig in vertikaler Richtung in den Sockel. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 47 Schritt 4. Sockel schließen: Schritt 4-1. Drehen Sie die Ladeplatte auf den Kühlkörper (IHS). Schritt 4-2. Drücken Sie leicht auf die Ladeplatte und schließen Sie den Ladehebel. Schritt 4-3. Sichern Sie Ladehebel und Ladeplatte mithilfe des Hebelverschlusses. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 48 Uhrzeigersinn zu drehen, wird der Kühlkörper nicht ordnungsgemäß am Motherboard befestigt. Schritt 5. Schließen Sie den Lüfter an den CPU- Lüfteranschluss des Motherboards. Schritt 6. Befestigen Sie überschüssiges Kabel mit Band, um eine Störung des Lüfters oder Kontakt mit anderen Teilen zu vermeiden. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 49: Installation Der Speichermodule (Dimm)

    2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) Die Motherboards Penryn1600SLIX3-WiFi bieten vier 240-pol. DDR2 (Double Data Rate 2) DIMM-Steckplätze und unterstützen die Dual-Kanal-Speichertechnologie. Für die Dual-Kanalkonfiguration dürfen Sie nur identische (gleiche Marke, Geschwindigkeit, Größe und gleicher Chiptyp) DDR2 DIMM-Paare in den Steckplätzen...
  • Seite 50: Einsetzen Eines Dimm-Moduls

    Erweiterungssteckplätze (PCI-Steckplätze und PCI Express Express -Steckplätze) -Steckplätze) Express Express -Steckplätze) Express -Steckplätze) -Steckplätze) Es gibt einen 2 PCI-Steckplätze und 5 PCI Express-Steckplätze am Penryn1600SLIX3-WiFi Motherboard. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 51: Einbau Einer Erweiterungskarte

    PCIE5 Steckplätzen. 2. Falls Sie nur eine PCI Express VGA Karten in der Hauptplatine installieren wollen, nutzen Sie dazu den PCIE1 Steckplatz. 3. Möchten Sie die ASRock DeskExpress-Funktion auf diesem Motherboard verwenden, dann installieren Sie bitte die ASRock PCIE_DE-Karte im PCIE4-Steckplatz.
  • Seite 52: Setup Der Grafikkarte

    Schließen Sie im Bedarfsfall eine zusätzliche Stromversorgung an die PCI Express-Grafikkarten an. Schritt 3. Richten Sie die SLI-Brücke mit den Goldkontakten an jeder Grafikkarte aus und schieben Sie die Brücke darauf. Vergewissern Sie sich, dass die SLI-Brücke ordnungsgemäß einrastet. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 53: Installation Von Drei Sli On Drei Sli

    PCIE3 Steckplatz, und eine andere Grafikkarte in den PCIE5 Steckplatz. Zwei Goldfinger Schritt 2. Schließen Sie die zusätzliche Netzversorgung an die PCI Express Grafikkarten. Versichern Sie sich, dass beide Netzbuchsen der PCI Express Grafikkarte angeschlossen sind. Gehen Sie bei allen drei Grafikkarten in dieser Weise vor. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 54 (Nur für SLI Modus) A. Klicken Sie auf das Symbol NVIDIA Settings icon(NVIDIA- ® Einstellungen) in der Systemablage von Windows B. Wählen Sie aus dem Kontextmenü nView Desktop Manager und klicken Sie anschließend auf nView Properties (nView- Eigenschaften). ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 55 D. Klicken Sie auf Properties (Eigenschaften), um das Dialogfeld der Anzeigeeigenschaften zu öffnen. E. Wählen Sie aus dem Dialogfeld der Anzeigeeigenschaften die Registerkarte Settings (Einstellungen)und klicken Sie auf Advanced (Erweitert). F. Wählen Sie die Registerkarte NVIDIA GeForce. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 56 Modus) A. Klicken Sie in der Windows ® -Taskleiste auf Start. B. Wählen Sie Alle Programme aus dem Menü, klicken Sie dann auf NVIDIA Corporation. C. Wählen Sie das Register NVIDIA-Bedienfeld. D. Wählen Sie das Register Bedienfeld. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 57 Sie dann auf Anwenden. Wählen Sie anschließend SLI Technologie aktivieren (empfohlen). * SLI ist eine eingetragene Marke von NVIDIA ® Technologies Inc. und wird ohne die Absicht einer Markenrechtsverletzung lediglich zum Zwecke der Identifikation und Erklärung für den Benutzer verwendet. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 58: Einstellung Der Jumper

    Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde. Wenn Sie den CMOS-Inhalt gleich nach dem Aktualisieren des BIOS löschen müssen, müssen Sie zuerst das System starten und dann wieder ausschalten, bevor Sie den CMOS-Inhalt löschen. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 59: Anschlüsse

    S.2 - No. 12) SATAII_6 (PORT3.1) Verbindungsstück kann für interne Speichervorrichtung benutzt werden oder an eSATAII Verbindungsstück angeschlossen werden, um eSATAII Vorrichtung zu unterstützen. Bitte lesen Sie „SATAII Schnittstellen Einleitung“ auf Seite 66 für Details über eSATAII- und eSATAII- Installationsverfahren. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 60 Verbindung Stromversorgungskabels mit dem Stromanschluss des Netzteil Netzteils. WiFi/E Sockel Dieser Sockel unterstützt WiFi+AP Funktion mit ASRock (15-pol. WIFI/E) WiFi-802.11g oder WiFi-802.11n (siehe S.2 - No. 35) Modul, einem einfach zu bedienenden Wireless Local Area Network (WLAN) Adapter. Damit sind Sie in der Lage, ein drahtloses Netzwerk aufzubauen und die Vorzüge drahtloser...
  • Seite 61 B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an OUT2_L an. C. Schließen Sie Ground (GND) an Ground (GND) an. D. MIC_RET und OUT_RET sind nur für den HD-Audioanschluss gedacht. Diese Anschlüsse müssen nicht an die AC’97-Audioleiste angeschlossen werden. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 62 Anschluss und passen Sie den (siehe S.2 - No. 13) schwarzen Draht dem Erdungsstift an. CPU-Lüfteranschluss Verbinden Sie das CPU - Lüfterkabel mit diesem (4-pin CPU_FAN1) Anschluss und passen Sie den (siehe S.2 - No. 5) schwarzen Draht dem Erdungsstift an. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 63 Installation der 4-Pin ATX 12V Energieversorgung IEEE-1394 Header Außer einem vorgegebenem IEEE-1394 Port auf dem Ein-/ (9-pin FRONT_1394) Ausgabe Paneel, gibt es einen (siehe S.2 - No. 20) IEEE-1394 Header (FRONT_1394) auf dieser Hauptplatine. Dieser IEEE-1394 Header kann einen IEEE-1394 Port unterstützen. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 64 Anschluss ausgestattet, der einen SPDIF-Audioausgang für eine HDMI-VGA-Karte zur Verfügung stellt und den Anschluss von HDMI-Digitalgeräten wie Fernsehgeräten/Projektoren/LCD-Geräten an das System ermöglicht. Um die HDMI- Funktionen Ihres Motherboards nutzen zu können, führen Sie bitte die nachstehenden Schritte aus. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 65 Schritt 4: Schließen Sie den HDMI-Ausgang an ein HDMI-Gerät an; z. B. an ein HDTV-Gerät. Hinweise zum richtigen Anschluss finden Sie in der Dokumentation des HDMI-Gerätes und der VGA-Karte. Schritt 5: Installieren Sie die HDMI-VGA-Kartentreiber in Ihrem System. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 66: Vorstellung Der Esa

    Festplatte als RAID-Laufwerk nutzen möchten, stellen Sie bitte die Option „SATA Operation Mode“ im BIOS auf „RAID mode“ ein und deaktivieren die Option „eSATAII Support“. Detaillierte Informationen über den RAID-Modus und den Nicht-RAID-Modus sind auf den Seiten 70 angegeben. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 67 Ausgabefeld über das eSATAII-Gerätekabel mit dem eSATAII-Anschluss, an den Sie das SATA-Datenkabel angeschlossen haben. Schließen Sie ein Ende des eSATAII-Gerätekabels an das Verbinden Sie das andere Ende des eSATAII- eSATAII-Gerät an. Gerätekabels mit dem eSATAII-Anschluss am Ein-/Ausgabefeld. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 68 DOS ausführbares Dienstprogramm. Auf der Internetseite von HITACHI finden Sie entsprechende Details: http://www.hitachigst.com/hdd/support/download.htm Die Beispiele oben dienen lediglich Ihrer Referenz. Die Steckbrückeneinstellungen können bei unterschiedlichen SATA II Festplatten verschiedener Hersteller abweichen. Aktualisierungen und ergänzende Informationen finden Sie auf der Internetseite des Herstellers. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 69 AII- Geräte Geräte Geräte Geräte Das Penryn1600SLIX3-WiFi-Motherboard unterstützt Hot Plug- und Hot Swap- Funktionen für SATA- / SATAII- / eSATAII-Geräte im RAID-Modus. HINWEIS Was ist die Hot-Plug-Funktion? Wenn SATA / SATAII-Festplatten NICHT für RAID-Konfiguration eingestellt sind, werden sie “Hot-Plug” genannt: Ein Einfügen und Entfernen von SATA / SATAII-Festplatten, während das System in...
  • Seite 70: Installation Von Windows Vista

    2000 / XP / XP 64-bit / Vista / Vista bit auf Ihren SATA- / SATAII-Festplatten mit RAID-Funktionalität installieren möchten, entnehmen Sie die detaillierten Schritte bitte dem Dokument, das Sie unter folgendem Pfad auf der Unterstützungs-CD finden: ..\ RAID Installation Guide ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 71 DTS Format Tonspuren und Musik-Mischungen drastisch Zufriedenheit. Folgen Sie bitte unter Schritten, um DTS Funktion zu aktivieren: 1. Installieren Sie die Treiber zu Ihrem System von der ASRock Unterstützungs-CD. 2. Starten Sie Ihr System neu. 3. Sie werden das Ikon...
  • Seite 72 Vorlieben geschneidert zu werden. Kino Modus Der Kino Modus ist für den Gebrauch mit Stereo-TV-Shows und allen Programmen verschlüsselt in DTS Umgebung. Das Ergebnis ist verbesserte Klangfeld Richtungsabhängigkeit, die sich der Qualität des getrennten 7.1- Kanäe-Tons nähert. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 73 ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 74: Contenu Du Paquet

    1. Introduction Merci pour votre achat d’une carte mère ASRock Penryn1600SLIX3-WiFi, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme.
  • Seite 75 - Giga PHY Realtek RTL8211B - Support du Wake-On-LAN Sans fil LAN - Module ASRock WiFi-802.11g - 54Mbps IEEE 802.11g / 11Mbps IEEE 802.11b - Supporter la mode multipointe d’accès de logiciel (Mode AP) et la mode de Station (Mode d’infrastructure et Mode Ad-hoc)
  • Seite 76 Panneau arrière ASRock WiFi_eSATAII I/O Plus - 1 x port souris PS/2 - 1 x port clavier PS/2 - 1 x port série: COM 1 - 1 x port parallèle: Support ECP/EPP - 4 x ports USB 2.0 par défaut...
  • Seite 77 CD d’assistance - Pilotes, utilitaires, logiciel anti-virus (Version d’essai) Caractéristique - Tuner ASRock OC (voir ATTENTION 13) unique - L’accélérateur hybride: - Contrôle direct de la fréquence CPU (voir ATTENTION 14) - ASRock U-COP (voir ATTENTION 15) - Garde d’échec au démarrage (B.F.G.) Surveillance - Contrôle de la température CPU...
  • Seite 78 13. Il s’agit d’un usage facile ASRock overclocking outil qui vous permet de surveiller votre système en fonction de la monitrice de matériel et overclocker vos périphériques de matériels pour obtenir les meilleures performances du système sous environnement...
  • Seite 79 Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC. 16. Les fonctions de module ASRock WiFi 802.11g ne sont pas Supporté ® sous Windows 2000 OS.
  • Seite 80 Lorsque vous placez les vis dans les orifices pour vis pour fixer la carte mère sur le châssis, ne serrez pas trop les vis ! Vous risquez sinon d’endommager la carte mère. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 81 Etape 2-1. Tenez le processeur par ses bords là où se trouvent des lignes noires. Etape 2-2. Orientez le paquet avec le dissipateur thermique intégré (IHS) vers le haut. Repérez la broche 1 et les deux encoches d’orientation. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 82 Etape 4-2. Tout en appuyant doucement sur la plaque de chargement, engagez le levier de chargement Etape 4-3. Fixez le levier de chargement avec la languette de la plaque de chargement sous la languette de retenue du levier de chargement. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 83 Etape 6. Fixez la longueur de câble en excès avec du ruban adhésif pour vous assurer que le câble ne gênera pas le fonctionnement du ventilateur ou n’entrera pas en contact avec les autres composants. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 84 2.3 Installation des modules m émoire [DIMM] 2.3 Installation des modules m émoire [DIMM] La carte mère Penryn1600SLIX3-WiFi dispose de quatre emplacements DIMM DDR2 (Double Data Rate 2) de 240-broches, et supporte la Technologie de Mémoire à Canal Double. Pour effectuer une configuration à canal double, vous devez toujours installer des paires de DIMM DDR2 identiques (de la même marque, de la même vitesse, de la...
  • Seite 85 DIMM. Etape 3. Insérez fermement le module DIMM dans son emplacement jusqu’à ce que les clips de maintien situés aux deux extrémités se ferment complètement et que le module DIMM soit inséré correctement. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 86 Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 2 ports PCI et 5 ports PCI Express sur la carte mère Penryn1600SLIX3-WiFi. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Seite 87 Si nécessaire, connectez une source d’alimentation auxiliaire sur les cartes graphiques PCI Express. Etape 3. Alignez et insérez le pont SLI sur les repères dorés de chaque carte graphique. Assurez-vous que le pont SLI est fermement en place. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 88 Assurez-vous que le pont 3-Way SLI est fermement en place. Etape 4. Branchez un câble VGA ou un câble DVI entre le connecteur du moniteur et le connecteur DVI de la carte graphique insérée dans le slot PCIE1. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 89 Manager (Gestionnaire de Bureau nView), puis cliquez sur nView Properties (Propriétés nView). C. A partir de la fenêtre du gestionnaire de bureau nView, sélectionnez l’onglet Desktop Management (Gestionnaire de bureau). D. Cliquez sur Properties (Propriétés) pour afficher la boîte de dialogue Propriétés d’affichage. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 90 (Avancé). F. Sélectionnez l’onglet NVIDIA GeForce. G. Cliquez sur l’ascenseur pour afficher l’écran suivant puis sélectionnez l’élément SLI multi-GPU. H. Cliquez sur la case à cocher Enable SLI Multi-GPU (Activer SLI multi-GPU). I. Cliquez ensuite sur OK. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 91 SLI puis cliquez sur Appliquer. Puis choisissez Activer la technologie SLI (recommandé). ™ ® * SLI apparaissant ici est une marque commerciale de NVIDIA Technologies Inc., et n’est utilisé qu’à des fins d’identification ou d’explications, au bénéfice du propriétaire, sans intention d’infraction. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 92 BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à l’opération d’effacement de la CMOS. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 93 SATAII_6 (PORT3.1) connecteur peut etre utilise pour le device de storage interne ou etre connecte au connecteur eSATAII pour supporter eSATAII device. Veuillez lire “SATAII Interface Introduction” sur le page 100 pour details concernant eSATAII et les procedures d’installation de eSATAII. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 94 USB 2.0 par défaut sur le (US6_7 br.9) panneau E/S, il y a deux (voir p.2 No. 19) embases USB 2.0 sur cette carte mère. Chaque embase USB 2.0 peut prendre en charge 2 ports USB 2.0. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 95 2000 / XP / XP 64-bit OS: Cliquer sur « E/S audio», sélectionner « Paramètres du connecteur » , choisir « Désactiver la détection de la prise du panneau de commande » et sauvegarder les changements en cliquant sur « OK ». ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 96 CPU sur cette carte mère, veuillez le connecter aux broches 1-3. Installation de ventilateur à 3 broches Broches 1-3 connectées En-tête d’alimentation ATX Veuillez connecter l’unité d’alimentation ATX sur cet en- (ATXPWR1 br. 24) tête. (voir p.2 No. 36) ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 97 SPDIF vers la carte VGA HDMI, (voir p.2 No. 28) et permettant au système de se connecter au un téléviseur numérique HDMI /un projecteur ctées / un périphérique LCD. Veuillez brancher le connecteur HDMI_SPDIF de la carte VGA HDMI sur ce connecteur. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 98 HDMI_SPDIF de la carte-mère. Connectez ensuite l’extrémité blanche (B ou C) du câble HDMI_SPDIF au connecteur HDMI_SPDIF de la carte VGA HDMI. A. extrémité noire B. extrémité blanche C. extrémité blanche (2 briches) (3 briches) ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 99 HDMI_SPDIF au connecteur du ventilateur de la carte VGA PCI Express. Veuillez vous reporter au préalable au manuel de l’utilisateur de la carte VGA pour l’utilisation du connecteur. ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 100 SATA » dans le réglage du BIOS à mode RAID et désactiver l’option « Support eSATAII ». Veuillez vous référer aux pages 104 pour des informations détaillées sur les modes RAID et non-RAID. 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 101 Connectez une extrémité du câble de périphérique SATAII Connectez l’autre extrémité du câble de au périphérique eSATAII. périphérique SATAII au port eSATAII du blindage entrée/sortie. 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 102 Veuillez visiter le site Internet des vendeurs pour les mises à jours. 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 103 Disques Durs SA A / SA AII et eSA La carte-mère Penryn1600SLIX3-WiFi gère les fonctions Hot Plug et Hot Swap pour les périphériques SATA / SATAII / eSATAII en mode RAID. REMARQUE Qu’est-ce que la fonction « Hot Plug »? Si les disques durs SATA / SATAII ne sont pas en configuration RAID, l’action d’insérer et de retirer des disques SATA / SATAII alors que le...
  • Seite 104 Vista et Vista 64-bit. Veuillez visiter notr site Web pour la mise à jour du pilote dans un futur proche. Site Web ASRock: http://www.asrock.com 2 . 1 4 2 . 1 4 2 . 1 4 Guide d’installation des pilotes Guide d’installation des pilotes...
  • Seite 105 DTS-format et de la musique améliore de façon spectaculaire le contenu. Suivez les étapes ci-dessous pour permettre la fonction DTS: 1. Installer les pilotes dans votre système à partir de CD supporté par ASRock. 2. Redémarrez votre système. 3. Vous trouverez l’icône (Realtek HD Audio ®...
  • Seite 106 6. Si vous sélectionnez DTS Neo: PC. Vous pouvez cliquer sur l’icône (Détail Paramètres) pour accéder aux contrôles. Mode Musique Mode Cinéma 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 107 Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASSETUP.EXE” dans le dossier BIN et double-cliquez dessus pour afficher les menus. 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 108: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock Penryn1600SLIX3-WiFi, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Seite 109 - Gigabit LAN 10/100/1000 Mb/s - Giga PHY Realtek RTL8211B - Supporta Wake-On-LAN LAN senza fili - Modulo ASRock WiFi-802.11g - 54Mbps IEEE 802.11g / 11Mbps IEEE 802.11b - Supporto modalita‘ Software Access Point (Modalita‘ AP) e modalita‘ Station (Modalita‘ Infrastructure ed Ad-hoc)
  • Seite 110 - Regolazione multi-voltaggio CPU, DRAM, NB, SB, VTT CD di - Driver, utilità, software antivirus (Versione dimostrativa) supporto Caratteristica - Sintonizzatore ASRock OC (vedi ATTENZIONE 13) speciale - Booster ibrido: - Stepless control per frequenza del processore (vedi ATTENZIONE 14) - ASRock U-COP (vedi ATTENZIONE 15) - Boot Failure Guard (B.F.G.)
  • Seite 111 SO (vedi ATTENZIONE 16) Certificazioni - FCC, CE, WHQL * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi.
  • Seite 112 Consente di creare un ambiente wireless e godersi la comodità di una connettività di rete wireless. 13. Si tratta di uno strumento di sicronizzazione ASRock di face uso in grado di implementare il controllo del sistema tramite la funzione di hardware monitor e sincronizzare le Vostre unita‘...
  • Seite 113 * Dopo il 1 Giugno 2008, tutti i sistemi Windows ® Vista vengono richiesti di essere in accordo ai requisiti minimi del sistema per Windows ® Vista Premium 2008 logo. 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 114 5. Nell’usare i giraviti per fissare la scheda madre al telaio non serrare eccessivamente le viti! Altrimenti si rischia di danneggiare la scheda madre. 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 115 Fase 2. Inserire la CPU 775-Pin: Fase 2-1. Tenere la CPU dai bordi segnati con linee nere. 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 116 Fase 4-1. Ruotare la piastra di carico sull’IHS. Fase 4-2. Bloccare la leva di carico mentre si preme leggermente sulla piastra di carico. 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 117 Fase 6. fissare il cavo in eccesso con fascette per assicurare che il cavo non interferisca con il funzionamento della ventola o che venga a contatto con gli altri componenti. 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 118 2.3 Installazione dei moduli di memoria (DIMM) 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre Penryn1600SLIX3-WiFi fornisce quattro alloggiamenti DIMM DDR2 (Double Data Rate 2) a 240 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDR2 negli alloggiamenti dello...
  • Seite 119 Inserire saldamente la DIMM nello slot fino a far scattare completamente in posizione i fermagli di ritegno alle due estremità e fino ad installare correttamente la DIMM nella sua sede. 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 120 Slot di espansione (Slot PCI ed Slot PCI Express) Slot di espansione (Slot PCI ed Slot PCI Express) Sulla scheda madre Penryn1600SLIX3-WiFi c’è 2 slot PCI ed 5 slot PCI Express. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit.
  • Seite 121: Installazione Di Due Schede Grafiche Pronte Sli

    Allineare ed inserire il Bridge SLI sui connettori goldfinger di ciascuna scheda grafica. Accertarsi che il Bridge SLI sia saldamente al suo posto. 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 122: Installazione Di Tre Schede Grafiche Pronte Sli

    Collegare un cavo VGA o un cavo DVI al connettore del monitor e al connettore DVI della scheda grafica inserita nello slot PCIE1. 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 123 C. Dalla finestra nView Desktop Manager, selezionare la scheda Desktop Management (Gestione desktop). D. Cliccare su Properties (Proprietà) per visualizzare la finestra di dialogo Visualizza proprietà. 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 124 SLI multi-GPU (SLI- multi-GPU). H. Cliccare sulla casella di scelta Enable SLI multi-GPU (Abilita SLI multi-GPU). I. Cliccare su OK una volta terminata l’operazione. 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 125 Technologies Inc. ed è usato solo a scopo identificativo o esplicativo e a beneficio dei proprietari, e non a scopo di violazione degli stessi. 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 126 BIOS. Se è necessario cancellare la CMOS una volta completato l’aggiornamento del BIOS, è necessario riavviare prima il sistema, e poi spegnerlo prima di procedere alla cancellazione della CMOS. 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 127 Leggere “Introduzione Dell’Interfaccia Di SATAII” alla pagina 134 per i particolari circa le procedure di installazione di eSATAII e di eSATAII. 1 2 7 1 2 7 1 2 7 1 2 7 1 2 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 128 Questo header supporta la funzione WiFi+AP con il modulo (15-pin WIFI/E) WiFi-802.11g o WiFi-802.11n (vedi p.2 Nr. 35) ASRock, un adattatore per WLAN (rete locale wireless). Consente di creare un ambiente wireless e godersi la comodità di una connettività di rete wireless.
  • Seite 129 Gb/s. Intestazione Di Rilevazione Di Questa intestazione sostiene la DeskExpress Hot Plug funzione di rilevazione di Hot Plug per ASRock DeskExpress. (5-pin IR1) (vedi p.2 Nr. 24) Connettori audio interni Permettono di ricevere input stereo audio da fonti di...
  • Seite 130 Installazione della ventola a 3 piedini Connettore alimentazione ATX Collegare la sorgente d’alimentazione ATX a questo (24-pin ATXPWR1) connettore. (vedi p.2 Nr. 36) 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 131 TV digitale HDMI/proiettori/ LCD . Collegare il connettore HDMI_SPDIF della scheda VGA HDMI a questo header. 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 132 C) del cavo HDMI_SPDIF al connettore HDMI_SPDIF della scheda HDMI VGA. A. estremità nera B. estremità bianca (2 pin) C. estremità bianca (3 pin) 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 133 HDTV. Consultare il manuale dell’utente di HDTV e della scheda HDMI VGA per il collegamento dettagliato. Punto 5. Installare il driver della scheda HDMI VGA nel sistema. 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 134 SATA) nell’impostazione BIOS sul modo e disattivare l’opzione “eSATAII Support” (Supporto eSATAII ). Fare riferimento a pagina 138 per informazioni dettagliate sulla modalità RAID e non-RAID. 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 135 Collegare una estremità del Collegare un’altra estremità del cavo della cavo della periferica eSATAII periferica eSATAII alla porta eSATAII dello alla periferica eSATAII schermo I/O 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 136 Visitare i siti web dei produttori per gli aggiornamenti. 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 137 AII e eSA AII e eSA AII e eSAT T T T T AII La scheda madre Penryn1600SLIX3-WiFi supporta le funzioni Hot Plug ed Hot Swap per periferiche SATA / SATAII / eSATAII in modo RAID. NOTA Che cosa è la funzione di collegamento a caldo? Se i dischi rigidi SATA / SATAII NON sono impostati per una configurazione RAID, è...
  • Seite 138 Swap con i sistemi operativi Windows Vista e Vista a 64-bit. Visitare il nostro sito Internet per l’aggiornamento futuro dei driver. Sito Internet ASRock: http://www.asrock.com 2 . 1 4 2 . 1 4 2 . 1 4 Guida installazione del driver Guida installazione del driver...
  • Seite 139 Utilizzando la tecnologia sonora di surround multi-dimensione, la qualita‘ audio delle tracce di formato DTS viene enormemente migliorata. Prego seguire la procedura d‘installazione per la funzione DTS: 1. Installare I driver sul sistema partendo dal CD di supporto ASRock. 2. Riattivare il sistema. ®...
  • Seite 140 La modalita‘ Cinema viene utilizzata per visualizzazione televisione stereo e tutti I programmi codificati in DTS Surrounf. Il risultato viene migliorato direzionalmente in qualita‘ di canale sonoro 7.1. 1 4 0 1 4 0 1 4 0 1 4 0 1 4 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 141 Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul file “ASSETUP.EXE” nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. 1 4 1 1 4 1 1 4 1 1 4 1 1 4 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 142: Contenido De La Caja

    1. Introducción 1. Introducción Gracias por su compra de ASRock Penryn1600SLIX3-WiFi placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 143 - Gigabit LAN 10/100/1000 Mb/s - Giga PHY Realtek RTL8211B - Soporta Wake-On-LAN - Módulo de ASRock WiFi-802.11g Inalámbrico - 54Mbps IEEE 802.11g / 11Mbps IEEE 802.11b - Apoya modo de Punto de Acceso de Software (modo de AP) y modo de Estación (modo de Infraestructura y modo de Ad-hoc)
  • Seite 144 - Múltiple ajuste de CPU, DRAM, NB, SB, VTT Voltage CD de soport - Controladores, Utilerías, Software de Anti Virus (Versión de prueba) Característica - Sintonizador de ASRock OC (vea ATENCIÓN 13) Única - Amplificador Híbrido: - Stepless control de frecuencia de CPU (vea ATENCIÓN 14) - ASRock U-COP (vea ATENCIÓN 15)
  • Seite 145 10. Para la instalación adecuada de la tarjeta VGA PCI Express, por favor, consulte la guía de instalación de la página 154. 1 4 5 1 4 5 1 4 5 1 4 5 1 4 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 146 13. Es una herramienta de overclocking de ASRock de usuario-fácil que le permite a supervisar su sistema por la función de monitor de hardware y overclock sus dispositivos de hardware para obtener el mejor funcionamiento del sistema bajo el entorno de Windows ®...
  • Seite 147 * Después del 1 de Junio de 2008, todos los sistemas de Windows ® Vista requieridos para satisfacer los requisitos del hardware mínimos para calificar el logo de Windows ® Vista Premium 2008. 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 148 No introduzca la CPU en el socket por la fuerza si se produce la situación anterior. Si lo hace, puede producir daños graves en la CPU. 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 149 Step 2-4. Compruebe que la CPU se encuentra en el socket y la orientación coincide con la indicada por las muescas. 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 150 (Aplique el material termal de interfaz) Paso 1. Aplique el material termal de interfaz en el centro del IHS de la superficie del socket. 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 151 Paso 6. Fije el cable que sobre con un lazo para asegurarse de que el cable no interfiere en el funcionamiento del ventilador y tampoco entra en contacto con otros componentes. 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 152 2.3 Instalación de Memoria 2.3 Instalación de Memoria La placa Penryn1600SLIX3-WiFi ofrece cuatro ranuras DIMM DDR2 de 240 pines, y soporta Tecnología de Memoria de Doble Canal. Para la configuración de doble canal, necesitará instalar siempre pares DIMM DDR2 idénticos (de la misma marca, velocidad, tamaño y tipo) en las ranuras del mismo color.
  • Seite 153 Paso 3. Inserte la DIMM con firmeza dentro de la ranura hasta que los clips de sujeción de ambos lados queden completamente introducidos en su sitio y la DIMM se haya asentado apropiadamente. 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 154 Express) Express) Express) Express) Express) La placa madre Penryn1600SLIX3-WiFi cuenta con 2 ranuras PCI y 5 ranuras PCI Express. Ranura PCI: Para instalar tarjetas de expansión que tienen 32-bit Interface PCI. Ranura PCI Express: La PCIE1 / PCIE3 (PCIE x16 ranuras) se usa para tarjetas PCI Express con tarjetas gráficas con una anchura de x16...
  • Seite 155 Alinee e inserte el Puente SLI en los contactos dorados de cada tarjeta gráfica. Asegúrese de que el Puente SLI está firmemente colocado en su sitio. 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 156 Conecte un cable VGA o un cable DVI al conector del monitor y el conector DVI de la tarjeta gráfica insertada en la ranura PCIE1. 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 157 Desktop Management (Administración de Escritorio). D. Haga clic en Properties (Propiedades) para mostrar el cuadro de diálogo Propiedades de Pantalla. 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 158 H. Haga clic en la casilla de verificación Enable SLI multi-GPU (Habilitar multi-GPU de SLI). I. Haga clic en OK al finalizar. 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 159 Technologies Inc., y se usa sólo para identificación o explicación en beneficio del propietario, sin intención de violar los derechos de propiedad. 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 160 CMOS cuando acabe de finalizar la actualización de la BIOS, debe arrancar primero el sistema y, a continuación, apagarlo antes de realizar la acción de borrado de CMOS. 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 161 . Por favor lea “Introducción del interfaz de SATAII” en la página 168 para los detalles sobre eSATAII y los procedimientos de la instalación del eSATAII. 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 162 Conector WiFi/E Este conector es compatible con la función WiFi+AP con el (15-pin WIFI/E) módulo ASRock WiFi-802.11g y (vea p.2, N. 35) WiFi-802.11n, un adaptador de área local (WLAN) fácil de usar. Le permite crear un entorno de red inalámbrico y disfrutar de la...
  • Seite 163 Configuración del conjunto de chips. En el panel de control frontal cambie la opción [Automático] a [Habilitado]. 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 164 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 165 (ver p.2, N. 20) (FRONT_1394) en esta placa base. Este jefe de IEEE 1394 puede apoyar un puerto de IEEE 1394. ctos 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 166 HDMI_SPDIF en el conector HDMI_SPDIF de la tarjeta VGA HDMI. A. Extremo negro B. Extremo blanco (2 patillas) C. Extremo blanco (3 patillas) 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 167 VGA HDMI para conocer el procedimiento detallado de conexión. Paso 5. Instale el controlador de la tarjeta VGA HDMI en su sistema. 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 168 RAID y desactive la opción “Compatibilidad con eSATAII”. Consulte las páginas 172 para más información acerca del modo RAID y no RAID. 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 169 Conecte un extremo del cable de dispositivo eSATAII al dispositivo Conecte el otro extremo del cable de eSATAII dispositivo eSATAII al puerto eSATAII del escudo de E/S 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 170 Por favor visite el sitio Web de los proveedores para obtener las actualizaciones. 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 171 HDDs SA HDDs SA A / SA AII / eSA La placa base Penryn1600SLIX3-WiFi soporta las funciones Hot Plug y Hot Swap para dispositivos SATA / SATAII / eSATAII en modo RAID. NOTA ¿Qué es la función de conexión en caliente? Si los HDDs SATA / SATAII no están fijados para su configuración...
  • Seite 172 Vista y Vista 64 bits. Visite nuestro sitio Web para obtener la actualización del controlador próximamente. Sitio Web de ASRock: http://www.asrock.com 2 . 1 4 2 . 1 4 2 . 1 4 Guía de instalación del controlador Guía de instalación del controlador Guía de instalación del controlador...
  • Seite 173 Por favor, siga los pasos siguientes para activar la función de DTS: 1. Instale los controladores en su sistema a través del CD de apoyo de ASRock. 2. Reinicie su sistema. 3. Usted encontrará el icono (Realtek HD Audio ®...
  • Seite 174 Envolvente de DTS. El resultado es incrementado la direccionalidad del campo de sonido que enfoque de la calidad del sonido discreto de 7.1-canal. 1 7 4 1 7 4 1 7 4 1 7 4 1 7 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 175 «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo “ASSETUP.EXE” para iniciar la instalación. 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 176 2 0 9 2 0 9 2 0 9 2 0 9 2 0 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 177 ® ® ® ® ® ® 2 1 0 2 1 0 2 1 0 2 1 0 2 1 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 178 ® 2 1 1 2 1 1 2 1 1 2 1 1 2 1 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 179 “ ” ® ® ® ® ® “ ” “ “ ” 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 180 ® ® ® ® ® ® 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 181 2 1 4 2 1 4 2 1 4 2 1 4 2 1 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 182 Pin1 Pin1 2 1 5 2 1 5 2 1 5 2 1 5 2 1 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 183 2 1 6 2 1 6 2 1 6 2 1 6 2 1 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 184 DDRII_1 DDRII_2 DDRII_3 DDRII_4 (3)* “ ” 2 1 7 2 1 7 2 1 7 2 1 7 2 1 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 185 2 1 8 2 1 8 2 1 8 2 1 8 2 1 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 186 “ ” “ ” “ ” ® 2 1 9 2 1 9 2 1 9 2 1 9 2 1 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 187 ® ® ® ® ® ® ® ® ® ® ® ® 2 2 0 2 2 0 2 2 0 2 2 0 2 2 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 188 ® 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 189 ® ® ® 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 190 2 2 3 2 2 3 2 2 3 2 2 3 2 2 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 191 ® ® ® 2 2 4 2 2 4 2 2 4 2 2 4 2 2 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 192 “ ” “ ” “ ” “ ” 2 2 5 2 2 5 2 2 5 2 2 5 2 2 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 193 SATAII_2 SATAII_4 SATAII_6 (PORT1.1) (PORT2.1) (PORT3.1) SATAII_1 SATAII_3 SATAII_5 (PORT1.0) (PORT2.0) (PORT3.0) 2 2 6 2 2 6 2 2 6 2 2 6 2 2 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 194 2 2 7 2 2 7 2 2 7 2 2 7 2 2 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 195 ® ® ® 2 2 8 2 2 8 2 2 8 2 2 8 2 2 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 196 2 2 9 2 2 9 2 2 9 2 2 9 2 2 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 197 2 3 0 2 3 0 2 3 0 2 3 0 2 3 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 198 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 199 ” “ ” “ ” “ ” “ ” “ ” 2 3 2 2 3 2 2 3 2 2 3 2 2 3 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 200 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 201 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 202 ® “ ” “ ” ® 2 3 5 2 3 5 2 3 5 2 3 5 2 3 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 203 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 2 3 6 2 3 6 2 3 6 2 3 6 2 3 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 204 ® 2 3 7 2 3 7 2 3 7 2 3 7 2 3 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 205 2 3 8 2 3 8 2 3 8 2 3 8 2 3 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 206 “ ” “ ” “ ” 2 3 9 2 3 9 2 3 9 2 3 9 2 3 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 207 2 4 0 2 4 0 2 4 0 2 4 0 2 4 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 208 ® ® ® ® ® ® 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 209 2 4 2 2 4 2 2 4 2 2 4 2 2 4 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 210 ® ® ® “ ” ® ® ® ® ® 2 4 3 2 4 3 2 4 3 2 4 3 2 4 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 211 ® ® ® ® 2 4 4 2 4 4 2 4 4 2 4 4 2 4 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 212 ® ® ® ® 2 4 5 2 4 5 2 4 5 2 4 5 2 4 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 213 2 4 6 2 4 6 2 4 6 2 4 6 2 4 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 214 2 4 7 2 4 7 2 4 7 2 4 7 2 4 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 215 2 4 8 2 4 8 2 4 8 2 4 8 2 4 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 216 2 4 9 2 4 9 2 4 9 2 4 9 2 4 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 217 2 5 0 2 5 0 2 5 0 2 5 0 2 5 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 218 ® 2 5 1 2 5 1 2 5 1 2 5 1 2 5 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 219 ® ® ® ® ® ® ® ® ® ® ® ® ® 2 5 2 2 5 2 2 5 2 2 5 2 2 5 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 220 ® 2 5 3 2 5 3 2 5 3 2 5 3 2 5 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 221 ® ® ® 2 5 4 2 5 4 2 5 4 2 5 4 2 5 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 222 2 5 5 2 5 5 2 5 5 2 5 5 2 5 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 223 2 5 6 2 5 6 2 5 6 2 5 6 2 5 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 224 ® ® ® 2 5 7 2 5 7 2 5 7 2 5 7 2 5 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 225 2 5 8 2 5 8 2 5 8 2 5 8 2 5 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 226 SATAII_2 SATAII_4 SATAII_6 (PORT1.1) (PORT2.1) (PORT3.1) SATAII_1 SATAII_3 SATAII_5 (PORT1.0) (PORT2.0) (PORT3.0) 2 5 9 2 5 9 2 5 9 2 5 9 2 5 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 227 2 6 0 2 6 0 2 6 0 2 6 0 2 6 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 228 ® ® ® 2 6 1 2 6 1 2 6 1 2 6 1 2 6 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 229 2 6 2 2 6 2 2 6 2 2 6 2 2 6 2 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 230 2 6 3 2 6 3 2 6 3 2 6 3 2 6 3 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 231 2 6 4 2 6 4 2 6 4 2 6 4 2 6 4 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 232 2 6 5 2 6 5 2 6 5 2 6 5 2 6 5 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 233 2 6 6 2 6 6 2 6 6 2 6 6 2 6 6 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 234 2 6 7 2 6 7 2 6 7 2 6 7 2 6 7 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 235 ® 2 6 8 2 6 8 2 6 8 2 6 8 2 6 8 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 236 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® 2 6 9 2 6 9 2 6 9 2 6 9 2 6 9 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 237 ® 2 7 0 2 7 0 2 7 0 2 7 0 2 7 0 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 238 2 7 1 2 7 1 2 7 1 2 7 1 2 7 1 ASRock Penryn1600SLIX3-WiFi Motherboard...
  • Seite 239 ® ® 2 7 2 2 7 2 2 7 2 2 7 2 2 7 2 ASRock Penryn1600SLIX3-WiFi Motherboard...

Inhaltsverzeichnis