Training The Telestart Transmitter - Webasto Thermo Top V Bedienungs- Und Wartungsanweisung

Training the Remote Start Transmitter
D
1. Place the batteries in the transmitter battery tray.
2. Remove fuse 1A (black) from the heater unit fuse holder
(power interruption).
3. Wait at least 5 seconds.
4. Place the fuse back in the fuse holder and within
5 seconds press the OFF button on the transmitter for at least 1 second.
5. Training is complete.
The training of a second or third transmitter is done in the same manner.
NOTE:
The training process can be repeated as often as you wish. The "oldest"
transmitted will be deleted each time.
25
min. 5 sec.
1A
max. 5 sec. min. 1 sec.
1A
OFF