Discontinuing A Measurement; Memory - Displaying The Last Measurement - Welch Allyn OSZ5 Bedienungsanleitung

Directions For Use

Discontinuing a measurement

If it is necessary to
interrupt a blood
pressure measurement
for any reason (e.g., the
patient feels ill), the
Start/Stop button can be
pressed at any time. The
device immediately
lowers the cuff
pressure.
Further information
Measurements should not occur soon after each other,
otherwise the results will be false. Therefore, wait at least 30
seconds in a relaxed position, sitting or lying, before you repeat a
measurement.

Memory - displaying the last measurement

The blood
pressure monitor
automatically
stores the last
measurement
value. Press the
Start/Stop button
for at least three
seconds, the last
measurement will
be displayed.
13
3 sec.