Time Settings - Abus IPCS24500 Bedienungsanleitung

8.2.1.2 Time settings

Time zone
Time zone selection (GMT).
Time setting methods
NTP
Using the Network Time Protocol (NTP) it is possible to synchronise the time of the Speed Dome with a time
server.
Enable NTP to use this function.
Server Address
IP server address of the NTP server.
NTP Port
Network port number of the NTP service (default: port 123)
NTP update interval
1–10080 min.
Manual Time Sync.
Device time
Computer device time display.
Set time
Display of the current time using the time zone setting.
Click on "Sync. with computer time" to adopt the computer's device time.
Apply the settings by clicking "Save".
84