Philips beauty HP4649/01 Bedienungsanleitung Seite 11

should clean the reservoir every 2 months.
Remove the reservoir, add 3-4 drops of
vinegar, top it up with water and put it
back into the appliance. Put the plug in the
wall socket and wait at least 2 minutes.
Hold the appliance with the barrel pointing
downwards and activate the conditioning
function for 3 seconds. Keep activating the
conditioning function at brief intervals until
the reservoir is empty.Then unplug the
appliance and rinse the reservoir with
water.
Storage
Always unplug the appliance before storing it.
C
If the conditioner reservoir is almost empty,
detach it and rinse it with water before
storing the appliance.
Put the appliance in a safe place and let it cool
down.
Do not wind the mains cord round the
appliance.
The appliance can be stored by hanging it
from its hanging loop.
Replacement
Always return the appliance to a service
centre authorised by Philips for examination
or repair. Repair by unqualified people could
cause an extremely hazardous situation for
the user.
ENGLISH
11